Recent content by EdJ

  1. E

    Muzzle trouble

    Voltages: Q1 e=3.22V b=3.81v c=8.58v, Q2 e=.16v b=0v c=.8v, Q3 e=0v b=.8v c=.01v Q4 e=0v b=.01v v=1.7v hope that this helps
  2. E

    Muzzle trouble

    Here are two pictures. I don't know if you can see it but both the colors of the led are shining when the pedal is on.
  3. E

    Muzzle trouble

    Yes, when bypassed everything sounds ok. I will upload some pictures later. Thank you
  4. E

    Muzzle trouble

    Hello. I built a muzzle from a Das Musikding kit and did read all the threads about trouble with it before I started. I put a lot of effort in it to get it right but , you guessed it, it does not work.. I have built a fair amount of pedals in the past and they did not always work from the start...
  5. E

    Comprehensive drive c18 question

    Thank you, I will shop for a 150pF then. There is too little room for me to get 3 caps in. People with more skills probably can do it.
  6. E

    Comprehensive drive c18 question

    Hello, I am in the middle of building a comprehensive drive and it appears that I don't have a 150 picofarad capacitor as needed for c 18 in the schematic. I do have a 100 pF though; would there be an audible difference if I use the 100pF? Thanks in advance, Ed
  7. E

    Milli amps Hydra delay?

    Perfect,thank you very much!
  8. E

    Milli amps Hydra delay?

    Hello, i just finished the hydra delay.i bought an all in package at das musicding and i have to say they did a very good job.i dont think it would have been much cheaper if i bought the parts myself and this saved a lot of time.I was a bit anxious about soldering the FV-1 but that went well...
  9. E

    Fv-1 debugging

    Thank you,good luck with it!
  10. E

    Fv-1 debugging

    Does it work now? As i am about to start building with a FV-1 for the first time,i am following this thread and curious how it is going on.
  11. E

    Humm trouble in nugget fuzz

    ok,thank you very much!
  12. E

    Humm trouble in nugget fuzz

    And the humm will be gone then?
  13. E

    Humm trouble in nugget fuzz

    Can someone please open up his or her nugget fuzz and turn the trimpot to the right?Does it humm?Thank you in advance,Ed
  14. E

    Removing potentiometers

    Thank you very much!
  15. E

    Removing potentiometers

    I love solder wick for things like this.I was never very good with a solder sucker.What kind,or brand,potentiometers are these?Fantastic that you dont have to use wire with them!
Back
Top