fav13andacdc's latest activity

I very much appreciate the thoughtful response. I used a conical early on but have since switched to a chisel tip and have enjoyed using...

Thanks! Some folks cheat with that silicone or Teflon jacket wire, but I like the challenge of regular pvc. 🤣 It’ll melt if you stare...

I cannot seem to figure out how to avoid burning/melting insulation when off board wiring, and you get it right up to the joint! Always...

Just finished up a custom PPCB combo build for my grandson. Using PPCB's Heaphne Amp and their Gravitation Reverb boards, I put together...

Done! Bought the board in july, been slowly buying parts here n there. Special thank you to Audandash for figuring out the enclosure...

You did it! Looks good.

EXACTLY

This pedal build has taken me on a journey. The evidence of this is littered all over this board like a tumbleweed in the wild west...

I'm in this game more for the solder fumes than the tone chasing. Builds that don't strike my fancy right away usually just go in the...

Oh, and I built one of these. It can easily fit in a 1590b.

Thank you for your help!

Makes sense to me. Your coupling cap for the audio probe doesn't need to be that big (1uf OR 630V). For guitar, a "standard" 100nf box...

I took another stab at the schematic in an attempt to practice KiCad and improve my general understanding of schematic layouts. Any better?

Came across this little technique for soldering legs to JFET adapters and thought it worked so well I’d share. Essentially, it’s just...

Not the prettiest, but by golly, it works! And it already paid for itself! I pretty much followed the Tagboard Effects layout...