Thanks - some good advice here too. I used to socket but as I'd made this pedal before a few times for friends I didn't feel the need as they always seemed reliable. But I'll have a look and test the fets!
Thanks some good tips here.
Generally I've never had an issue soldering until recently. I used to get nice small clean shiny joints but they've started being blob like and dull. I've replaced the tip and haven't changed solder. I'm wondering if my iron is on the way out?
Hello,
I've been building a couple of Dr Roberts. The first one works no issues.
Second one is a swine. There is no signal when engaged. Just buzzing.
-Bypass ok.
-leds ok
-pots affect volume /gains/mids in both normal and boost channels (you can hear volume/eq of the buzz change).
I've...
Hello fellow humans.
I've just finished the radium springs pedal and it sounds really good.
Can anyone advise which toggle position is blackface and which is brown please?
I would guess up is black, mid reverb and down is brown? Id like to know for sure though.
Cheers
G
This is pretty cool! I found this as I am also planning on doing something similar
3 questions -
1. What size box?
2. Is the switch to flip them not worth it then?
L
3. Do you think the lack of blend control from the hot wax is missed?
Cheers
a lucky dip it seems! I i have just gone with the closest match and if that doesn't work will try them in series but i don't think it subbing should matter in theory as they're close enough - 348k for 360 and 57K6 for 58
Hello everyone
My first post on the PCB forum!
I've got a lot of pedal building experience but i've got a question for you. I've been working on a Pharmacist overdrive. When snapping the circled daughterboard from the sprue the part flew off and is not to be seen!
I am therefore asking if...