Recent content by iain

Comedy update: after labeling the enclosure wrongly I noticed that pressure on the "depth" knob caused the signal to cut in and out, and once I unscrewed the nut all the above problems went away completely. Guess that pot isn't on super straight and the board was being warped when everything was...

Didn't do the best job cleaning up but now that sound comes out I'll go back and deploy the alcohol swabs. Have now learned that there is a TL062 along with the usual 72, 84 etc ?

So after a bit of sanding down I get a consistent connection which is good news, something to keep in mind with the painted enclosures in future. Having been able to turn it on, it seems I've created some kind of a monster: No dry signal but a "beat" in time with modulation occurs when pedal...

Attached some blurry photos, but it is indeed mostly painted inside so I am deploying the sandpaper as we speak, thanks! EDIT: actually attached now

I have a fun issue with my Pitch Witch build, where plugging in a cable to either input or output causes the whole circuit to cut out (based on the modulation LED turning off... and not back on). On investigation it seems like it also happens when the sockets are held at a particular angle...