Recent content by jamie j.

I didn't even think of this. I contacted Musikding. We will see if they send me another. I may just buy one from PedalPCB. I think they are just 6 bucks or so. I assume the one I need is the D3lay EEPROM.

Random thought: I bought this pedal from Musikding. Do you think there is a chance that the 24LC32A EEPROM is not preloaded? Would it be worth it for me to buy one directly from PedalPCB?

Yeah, I get the dry if I start turning the mix down from all the way up. I'll give this a try. I may not be able to get to it tonight. I'll post back here when I try it.

I do not have an audio probe. FV-1 Voltages: 6: 3.335 8.3.331 L78L33: In: 8.89 Out: 3.330

Had to put this aside for a while but i’m back. I discovered that if i turn the mix back I have sound but no delay. With mix all the way up, i have no sound. Any ideas?

I do not own an audio prob. Would it be helpful since I do have audio?

I'm not really sure what to do with this info. Math is not my strong suit. and that 27 would have read close to 27 before I mounted it to the board.

Working pedal: 14.98k 11.95k 21.98k 26.95k Bunk pedal: 13.17k 11.96k 22.91k 20.95k That 27k is reading a little low on the bunk pedal.

Took an up close pic. Is this better?

All of the numbers have continuity with each other.

I understand and completely appreciate your help. I took the measurement and it was 2k. The resistor above it reads 47k and the one below reads 390k (this kit provided a 390 instead of a 392 but that was specified in the BOM). So, that just doesn't seem to be the issue. Now, my photography may...

I can 100% assure you I do not have a resistor out of place. I label them first and still read them when I put them on the board. Also, if a resister ended up in the wrong spot another resistor would be missing a spot and I would catch it. I double checked the caps as well and they are correct...

Yep. They read .296 and .293 - mounted to the board (don't know if that makes a difference with diodes).

I got on that reads .313, one at .310, two at .308 and the rest are upper .29s and lower .30s.

I do. I'll check it this afternoon and report back to you.