Recent content by Jonnytexas

Not sure where to go from here..might just be easier to start over. I have another board. I really appreciate your help.

Fair enough, I use what's on hand. Perhaps that's why I'm here with a non working project. 1k8..brown, gray, black, brown, brown 470r..yellow, purple, black, black, brown 820r..gray, red, black, black, brown 1k5..brown, gray, black, brown, brown Edit: The 1/8 is hard to see 1k5...looks like...

Thanks again for trying to help. Gain knob acts pretty much like a volume control. The highlighted resistors are the correct values. Confirmed by bands and DMM

Thanks for the reply. My iron sits around 790. The green is producing no gain. It works like a boost pedal.

Thanks so much for taking a look! Have continuity between colors. Edit: have continuity within colors.

Maybe this is a better picture.

I went through all caps and resistors and could not find any mistakes.

I will give this one more try. Can anybody offer any guidance?

Not sure where to probe. Anybody have any ideas? It's very close to working, just cant get any gain out of the green side.

Where would I probe?

Thanks szuk, it appears they are the same. I also have j112 and j113. Im fairly limited in my knowledge, but I believe it is not part of the distortion matrix, maybe a buffer?

Anybody have any thoughts? I got a shipment in from BLMS, so now have the proper pots in. The pedal works perfectly except for not having any appreciable gain on the green side.