JTEX

That workbench is way too clean.

There's a tool specifically for that sort of nut, or you can probably fashion one out of some metal tubing...

There's a nut under the top. Tighten it and it clamps on to the (solid round!) shaft.

Is this the update I've been waiting for? 😲 "Speaking of schematic display, Seth Hillbrand added live junction updates when dragging...

gawd I haaatee soldering wires to things. I use JST connectors wherever I can. You can get pre-wired cables from Aliexpress in 50mm...

I hate wiring passionately enough that if I were to make pedals in some kind of volume, I'd try my best to have every component on the...

Hey oh guys I see here maybe I could be of some help I have a 30 years, more or less, experience with graphic design and designing boxes...

I'm not a real engineer either. Best to try this on a bench or in a simulator, check for stability and so on.

R2 can go as low as U1 can comfortably drive without distorting, so probably not much less than 1k if you're using a TL07x. At the other...

I don't see why precision opamps (low DC offset) would make a difference. You can change the C2 value to whatever you like. It just...

I would actually use a dual opamp in real life. The only reason you see 2x OPA196 in the schematic is that I did it in a simulator and...

Thank you! I was today years old when I realized, thanks to you, that I could just use a wav file as the input to a circuit simulation...

I am having a hard time imagining the use case for a balanced in/balanced out pedal, especially one that would need a true bypass...

I'm afraid I can't help, I don't use LTSpice.