Recent content by mattdrago

Anybody have the drill template for the Kings Hand that they could share? I haven't been able to find another build that has the same kind of layout with the two toggle switches beneath the 2nd row of pots. I know the build docs haven't been posted yet, but any help with just getting a drill...

Very good point! I was operating under the assumption that one would already know the threshold voltages of whatever diodes they choose to use, but you'd also need to know the current across the diode for the corresponding Vf. I wanted to somewhat simplify my descriptions of what I did so that...

Awesome builds! I've got a question if you don't mind me asking; for the FDIC Boost, the schematic shows these two connections below the IC labeled "BP_1" and "BP_2", any idea what that is?

I used all of the original values given in the build document, so I used 22nf for the input caps. If I recall correctly, I'm pretty sure the input caps here are being used to block DC voltages from getting into the signal path, so I doubt it's filtering out any frequencies that are audible.

Oh okay I gotcha (y) I just finished building a Paragon Mini the other day and did a side-by-side comparison with my original Analogman KoT and honestly the only difference I could hear was that the Paragon Mini sounded like it had a bit less low end compared to the original. I haven't really...

Very nice build! I'm curious about the low gain feedback cap being set to 47pf here instead of 100pf. Are you saying you did this on the low gain channel? If that's the case, does this change increase the overall gain on this channel, but just not as much as changing the resistor value from 1k...

This is my first post here and I've been really liking the builds I've been making from PedalPCB, so I wanted to help contribute to the community! I was searching the forums and couldn't find a post describing these types of Klon mods, which I thought was odd, so I figured I'd make a post...

Whoah this is awesome! I've been wanting to try out the copper hammer enclosures from Tayda for a while now, but I've been hesitant because I wasn't sure how the UV Print would turn out with it. The picture you posted of yours has absolutely sold me; even with the dark color used, you can...