Recent content by Morbidpale

Thats so hot! Gorgeous work.

I bought H11f1's from digikey (x10 purchased) and mouser (x10 purchased). I ran the test on them per the helpful Chuck D Bones (https://forum.pedalpcb.com/threads/pandoras-box-fizzle.25875/post-329869). I'm looking for an approximate range of 320mv to 2.5v. What I get is 1.8v to 7.1v. I tested...

True that. The broadcast works best at almost breakup and then when you dig in you really start to hear it. Very reactive. Although after decades of trash talking tube screamers I'm suddenly like "maybe I like these now?". So any opinion i have might be worthless now. 🤫

So I got out the pedal and what sadly are terrible notes. I remember liking this thing but not so much now. 🤔 so I got out my smallsound/bigsound mini because I know i loved it. But then I was pouting and thinking of how to redo it so it's better. I guess I'm just over fet based drives. I can't...

But looks spot on!

I remember feeling the same. I made a few tweaks to the Tone toggle and biasing to get more sag and range. Ill dig out my papers on in tomorrow and let you know what I did.

I solder in some bare wires to the main board sticking up, wiggle the footswitch board over them and onto the switch to solder. Bing bang boom.

Love the small footprint fuzz. I've done a few small box builds and it's a whole new test of patience.

There's this too: https://www.freestompboxes.org/viewtopic.php?t=25452 Definitely a buffer but has positve reviews. I will breadboard it this weekend and see if it's a viable option as well.

True that. But buffer or not it works. Im not smart enough to know why though. Are there downsides to this option?

I found this Pickup that is working well. The Q1 stage before the fuzz face. https://www.diystompboxes.com/pedals/3tran.JPG Sounds great. I think some tweaks and I'm golden. This pickup sim should be more popular.

I have been working on a dual filter pedal. Something very out of my wheelhouse. I liked one channel of the DBA Sound Saw so I started learning about notch filters to create a second channel I liked. The circuit needed some more volume and I wanted to stay with the reverse beta theme the circuit...

I thought this was an over kill thing to build. Now I know it is BUT totally gonna make one now. Bitchin' build. Looks rad.

https://dirtboxlayouts.blogspot.com/2019/08/death-by-audio-redblue-card-fuzz.html?m=1 Just for poops and giggles I was wondering if I could remove the fuzz and just hear the filter and resonance controls. I messed with it enough to know I dont know how. 😀 Removing the diodes and changing...

Good catch. Looks like i forgot to list the switch on the layout. The tone stack is almost flat. The button on the side changes the Low Pass side a little and brings back some of the Muff scoop. Its subtle but it works well for me. Using the push button over a toggle seemed like a good idea to...