Recent content by peterkarak

Ok, if it's not the switch, I'll just keep using the pedal the way it is with my Morley ABY. I'm fine with that. Thanks again for your help in explaining how to test the switch.

I'm not sure if I understood correctly as to where to insert the plug. I did unscrew the body of the plug and inserted it into the ex. bypass and shorted the solder lugs with a metal object, but the light on the pedal stayed on. If that was the correct way to test it, I guess the problem must...

Thanks for the reply. I have no idea how I might go about shorting the switch outputs or momentarily shorting the contacts of the “remote switch” port. Is that simple to do? I don't want to risk doing any damage to the pedal because it's old and rare. The pedal is stuck in the "on" position...

Ok, thanks.

"Switcher" is the perfect word for it. I am happy using the ABY for now, but you've got me thinking about one day building a switcher myself. Thanks for the confidence. If I one day wanted to see if there is anyone on the forum that lives nearby and might be able to help with fixing my TC E...

I might think about doing that instead. Thanks again!

Ok, thanks for explaining that for me.

Thanks for the information! I'm not sure what a looper is. I have 2 loop stations but I think you're talking about something else. It's something that would replace the Morley ABY? I'm ok with using the ABY for now. Maybe one day I'll have the time (and the confidence) to try building something...

Exactly!

The connector can be disconnected from the switch, but it doesn't seem that the switch can be removed and replaced without lifting the circuit board, and I don't trust myself to try that. But I can still use the pedal as is, by using my Morley ABY pedal and a couple of cables. Just tried it, and...

Are you talking about the connector attached to the white wire that goes to the switch?

here are the insides, Sustain on left, Booster on right Does anyone know what the EX. Bypass input does and how it works? It takes a 3.5mm jack.

I've got an 80's TC Electronic Booster + Line Driver & Distortion and the footswitch no longer works. The pedal is stuck on the "on" position. My question is: Would it be possible to take the working footswitch from my 80's TC Electronics - Sustain + Parametric Equalizer and put it into the TC...