Recent content by r.nandez54

Not yet. I got another board to see if I did something wrong but still have yet to make a tayda order for all the necessary parts and currently in limbo.

Am I the only one getting a ton amount of hiss from the full size Parentheses when the octave is activated? Is there a way to fix this?

So I gave it a go and I'm still not getting any effect sound. I'm using a sound probe to see if I can follow the sound but I'm still learning how to use it. I'm gunna wait till after the new year to order from tayda for those MLCCs.

My man! That's some serious experience you got there. That's cool that your daughter got into something you both could share experiences in as well, I have a newborn and look forward to things like that. I really appreciate the help. Like I mentioned before I'll report back after I figure out...

Once you mentioned that they do have to go a certain way I'm almost sure of it. And it looks like @digitalsea might be using the same caps I am. I tip my hat to you sir, thank you. I'll report back after getting this corrected. Side question, how did you learn all these specifics? Is it your...

I'll do this when I get home, I think this might be the problem. Question about those 1uf caps I'm using, the ones I got were polar I think. One leg is longer and the have a little plus sign on that side. https://www.taydaelectronics.com/1uf-16v-radial-tantalum-capacitor.html are those ok to use...

Left side of R2 is 1.053 Right side of R2 is 1.054

Ok, so this morning I was just going positive and negative leads on the resistor. Now I'm putting the negative lead on the main negative point from the power jack. I confirmed that R4 is correctly a 47k resistor and is directly below TL072 and R3 is correctly a 1M resistor and is directly below...

For R3 this is what I'm getting with TL072 removed Negative probe to the left reads: -1.064 Positive probe to the left reads: 1.067

I have a few so I tried 3 different TL072's last night as well as 3 different LM324. Should've mentioned that too, sorry.

Thanks for correcting me re/78L05 I got the same values after trying to resolder. I should mention that mine are socketed as well. I'm not sure if this is supposed to happen but if I take out Tl072 and test the socket itself I get a different reading 2.950 vs 2.778 with IC pin 3 and 4.342 vs...

Appreciate the help dude. Tl072 reads: 1, 2.944 2, 2.940 3, 2.778 4, 0.1 5, 3.272 6, 3.290 7, 3.273 8, 8.83 LM833N: 1, 2.773 2, 2.763 3, 2.576 4, 0.0 5, 2.582 6, 2.587 7, 2.588 8, 0.80 LM324N: 1, 4.627 jumps +/-.002 2, 4.410 3, 4.401 4, 8.82 5, 4.537 jumps +/-.002 6, 4.361 7, 4.407 8, 3.821...

No worries man. I'll update if I can figure anything out, maybe we have the same issue.

Ac on the DMM is the v~? If I did that correctly it fluctuates around 5.99. Also, I made a mistake with the pinouts 9 is 16 and 16 is 9. Here is the readings I'm getting at the moment with correct pin out 1, 4.99 2, 2.504 3, 0.1 4, 0.1 5, 5.99 and bounces around but settles on 000 6, 2.504 7...

I'm also having this issue. When the pedal is on there is a boost in volume and I attempted to pull out pt2399 to see if there were any changes with anything and no change was noticed. My voltages across pt2399 are: 1, 4.99 2, 2.503 3, .1 4, .1 5, 2.801 but keeps dropping 6, 2.504 7,.785 8...