Robert's latest activity

Rabbit hole? What rabbit hole? I have one of these on the way, which I believe is a sort of knockoff of the NorthridgeFix that...

I should add, the "Verify EEPROM" button in an EEPROM programmer tool just confirms that what is on the EEPROM matches what is in the...

Correct, as long as Asprogrammer is reading the HEX files correctly there is no need to convert to BIN. Asprogrammer doesn't know what...

The last time I used Asprogrammer (years ago) I don't think it supported HEX files, so you had to convert the HEX file produced by...

Just a heads up... I'm not surprised, but was curious to know how this would be handled.... Now I know. :ROFLMAO: If you have a PCB...

The original used a 0.47uF electrolytic capacitor so the polarity is marked accordingly. You can use a 470nF film, in fact I should...

Since an "ideal" solution is going to take a while to figure out, I decided to just take the plunge and try one of the budget digital...

Because it's an undisputable fact that "metal can" and "NOS" sounds better on the Reverb listing.

Why not just go with an Op07 and call it a day? I have both and cant tell a difference. Plus you can get them from legit vendors and not...

I'll be making some available shortly. (most likely spread out over a few batches) Some are planned to be included with an upcoming...

This should be 22pF, not 22nF. That would probably kill your signal at the tilt EQ. (which is where you are losing your signal)

So you are naming it “Fart butt sounds “ right?…. Riiiiight?

Make sure you don't have a solder bridge here. I know this is after reflowing and not the original issue, but still better safe than...

I looked at Jameco during my recent hunt. I am by no means an expert, someone might tell me my entire haul is fake (I sure hope...

I've built a few and actually did mods to make it sound more like a Soldano SLO 100. I Changed C8 from a 100pF to 220 pF cap, to take...