Recent content by SmokinFoolz

UPDATE: FIXED! works now and doesn't shut off.... Here is what I did: JTEX's mention was a wonderful starting point, checked values, everything was fine, some values slightly off but very close. Gave me an area to investigate that includes an electrolithic. Scroll up and you'll see...

Thanks all for the tips today! Ill get to work and report back

Changed the Footswitch out today (with and without a breakoutboard) and same issue. The pedal stayed on for about 10 minutes then fizzled off quickly out of the blue without warning. light stays on, no pop sound, it just thoughtfully fizzes to mute with the led still on and goes silent without...

I have a Pathogen Distortion with a curious problem. So it works (and sounds amazing I might add) but the sound crackles out and no sound after about a minute. The led works as it should. When bypassed the regular signal is audible and bypass functions as normal with Led off. Anyone here...

UPDATE: I used 12k for those two spots and it's awesome now. Could probably go lower but its close enough. The volume drop is there, but barely noticable with the 12K.

Ok, this is my second post on this forum but this thread is very helpful for me. I had the same issue. So... I didn't EVER look at the picture on the item page, I instead followed the build PDF. that was my problem. I had the low volume issue and I used 47k as PDF stated. The picture of the...

Rawkawn indeed! Your post may help me, I have the opposite problem. My Cepheid chorus works as it should except for one issue, the volume is LOW instead of high. I'll try decreasing the R34 and R35 values and see if it helps and report back. If no avail, I'll create a new thread.