Spiff4565's latest activity

I saw another Daydream build where the regulator was in opposite of what I did. I went by the image screen printed on the PCB. I'll...

I assembled a Guvenator recently and over all I am very happy with it. I'm building another one and rather than PCB mounted pots I'm...

The mystery component is a 'bridge rectifier,' consisting of an interval array of four 1N4003 or 1N4004 equivalent diodes. They either...

Yes, it has four legs. Thank you for researching this. so far after replacing all the caps and power regulators it appears to be cured...

My Voodoo Labs Pedal Power 2 started humming. Popped the cover off and found one of the 1000uF caps bulging. Took it out and the...

The board assembly was straightforward, nothing of note. However the next build I will use solder lugged pots and fly the leads for the...

Yes, that is a brass plate. It was hand sized/shaped/brushed.

That came out nice. Is the faceplate brass you shaped and put water slides on? If you do another build you want to post there is a...

Ok, here is the final product. While the execution was way off target and several lessons learned, the athestics are much closer to what...

The assembly was pretty straight forward. It sounds great! I wanted to do a little more for the astehtics than a simple black box, so I...

I've been using a Circuit Specialists Station 75 unit for the past few years. And I've been fairly happy with it. But I just upgraded to...

I created an Excel template to organize the BOM. It's still a work in progress but ultimately I'll have it to auto sum parts, populate...

I doubled checked resistors and capacitors and they are all correct. I think I discovered my issue. The regulator was in backwards...

I'm going to pop out the TL072IP and put TL072CP's. I don't have any of the CP's right now but will see if that fixes things.