Recent content by taita87

It works 🥲 the ground wire on the switch socket had no continuity, I just re soldered it!

Uhm... I tried to re-solder the 4pin joint, reassembled and now I'm reading 1- 4.40 2- 4.45 3- 2.60 4- 0 5- 4.36 6- 4.40 7- 4.48 8- 7.90

I also removed the bottom pot to show you the circuit

Thank you sir! DC reading in the pins: 1. 4.35 2. 4.38 3. 2.57 4. 0 5. 4.31 6. 4.35 7. 4.43 8. 7.80

I'll try the point 2 in some hours. About point 1.. the pots are not touching the circuit board cause I used some round thick plastic adhesive they sent me with rest of the material, I don't know what was the purpose of them and I used to isolate them from the circuit board.. but I want to ask...

What Everyone said, I switched the outpot jack wire to the tip, It was soldered to the ring

Anyway, the pedal is now working on bypass, but I get no signal when it's on

I had problems finding the right soldering tip. I thought that soldering these tiny boards required a really small tip, but the one that I have doesn't melt on the very tip. I have to melt at middle height, and it's the same with thicker tips (no melting on the very tip, just some millimeters...

Can you explain what I did wrong? Like too much tin, tin going through the other side of the board or not going at all etc? It's my first time

It's my first time soldering i know it's a mess. Yes I tinned them but I had no much space to do some soldering so something was really bad cause I had no space. The jack tips are soldered to the orange wire on both side

Nope, if I plug the cables into this pedal it's like there's no signal at all

Hello can someone tell me if this build is OK or there's something obviously wrong in the build? The led is working but when I plug in the cables I ear nothing from the cabinet, no signal at all. I have to admit that in the first place I plugged a 9v battery with wrong polarity, maybe I broke...

The fuzz dog alternative though it's another circuit with different components :/

Thank you so much but is there anyone who live in Europe? Buying from us market for me is expensive, prices inflate for shipping and taxes

Hi all! Firstly, this is my dream community!!! How I lived without this I dont know! Coming to the point, I would want to build a Mach 1, as 220euro for a lightspeed is really too much... and cause I LOVE DIY things. There are some problems: 1- I have basic soldering abilities (here and there...