Speedy Gonzales PCB

mtmcl14

New member
Hello, I am wondering if someone can post a picture of a completed speedy gonzales circuit board, I am thinking about ording this soon and I am curious how it looks complete.

Thanks
 
It's tough to get a good pic, it's always moving...

BO1O2T9.gif
 
Hope this is helpful, my very amateur effort but it does work….followed the build doc used a W20K instead of a W25K and as previously mentioned used a 22n for C2.Set the TP at close to 4.5v Played against a Mas Malo …they are very close.
 

Attachments

  • IMG_8065.jpeg
    IMG_8065.jpeg
    438 KB · Views: 38
  • IMG_8068.jpeg
    IMG_8068.jpeg
    385.9 KB · Views: 38
Nice! Looks professional to me.
C25K would also work well for HOT. Not sure why Fuller chose a W-taper since there is not much going on at the CCW end.
If anyone wants HOT to go to 11, then jumper R5 and make HOT C10K.

Where is the BIAS trimpot set (resistance or % rotation)?
 
oops sorry about that… I didn’t really pay attention when making the adjustment so not really sure about % of rotation.
 
Back
Top