spi

No sweat man. It was fresh in my mind because I was working on it today and this seemed the most logical place to post it. What I...

I remember the good old days when Tayda enclosures came without overspray on the inside and in the screw holes

Thanks to @keyth72 for making this project available. I am really happy with the results. I ordered the PCB's from Oshpark and had to...

This one sounds awesome, unsurprisingly. Might be my favorite Marshall flavored pedal ever. Dave Friedman is my hero.

same

6-32 works for me

I think the Landgraff mods are the one's mentioned here ggg_its8_mods.pdf (generalguitargadgets.com) under the section "Expensive...

Good to know! I've had a couple where the DC cable had to be positioned just so or else there was no connection. On a very happy note, I...

The 2nd gain stage of the CC has a fixed gain (all the gain adjustment is made in the first stage). On the deluxe, the Mode basically...

Ground issue? By not working, do you mean doesn't turn on, doesn't pass audio, passes noise?

Are you getting a good ground? Check that the inside of the enclosure has continuity with the negative power lug, as well as the ground...

It has two gain stages, using both halves of a dual-op amp chip, followed by hard clipping diodes. To explain the circuit, refer to...

Is this a trick question? The AA doesn't have any component changes compared to the CC, other than an added clipping diodes option.

I've always liked the Touch (PPCB Contact). Simple, no frills, 3-knob, slightly tweaked TS. I think I like it because of the LED...

thats what she said