hi everybody, first post here
I have built a Terrarium, but I cannot get any sound out of it...I have built a lot of Eurorack Modules and other synth/Stuff... but really cannot understand what is wrong with this pedal. No audio at all, not even when the pedal is bypassed
I can program the Daisy Seed normally. It powers up correctly (at least the red LED is on). I have loaded the "test" program (it works), CloudSeed and Rythmic Delay. Always no sound...
Here's what I have checked:
-Orientation of the TL072 is OK, so is the Diode and the Electrolytical capacitor
-In and Out Jacks and their lugs are ok.
-9V DC in is OK and the Daisy powers up, the LED respond if the Footswitch is pressed...
-pots are not touching anything (see the red tape under them...)
I attach a couple of pics. I have used some ceramic instead of film capacitors, but this should make a huge difference, at least that's what I believe![Upside-down face :upside_down: 🙃](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f643.png)
Also, my pots have an ON/OFF switch, but the pot taper should behave normally and indipendently from the switch...
ANY advice is appreciated, thanks!
I have built a Terrarium, but I cannot get any sound out of it...I have built a lot of Eurorack Modules and other synth/Stuff... but really cannot understand what is wrong with this pedal. No audio at all, not even when the pedal is bypassed
I can program the Daisy Seed normally. It powers up correctly (at least the red LED is on). I have loaded the "test" program (it works), CloudSeed and Rythmic Delay. Always no sound...
Here's what I have checked:
-Orientation of the TL072 is OK, so is the Diode and the Electrolytical capacitor
-In and Out Jacks and their lugs are ok.
-9V DC in is OK and the Daisy powers up, the LED respond if the Footswitch is pressed...
-pots are not touching anything (see the red tape under them...)
I attach a couple of pics. I have used some ceramic instead of film capacitors, but this should make a huge difference, at least that's what I believe
![Upside-down face :upside_down: 🙃](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f643.png)
Also, my pots have an ON/OFF switch, but the pot taper should behave normally and indipendently from the switch...
ANY advice is appreciated, thanks!
![terrarium1.jpg terrarium1.jpg](https://forum.pedalpcb.com/data/attachments/76/76713-52be745e4e4e2e5c03aed29deef6ecef.jpg)
![terrarium2.jpg terrarium2.jpg](https://forum.pedalpcb.com/data/attachments/76/76714-fb82a25088a15b5f972ca337c47c38ff.jpg)