What kind of pot is this?

[BuddytheReow]

SBP sent me a goody bag and am finally going through it. Can anyone tell me what kind of pot this is? It's a 16mm pot, but just odd labelling...

 

[Harry Klippton]

Did you meter it?

 

[pbrommer]

Looks like a reverse audio taper 1M. Better send it to me for disposal.

 

[BuddytheReow]

Did you meter it?

No not yet. I've only had 10 min go go through everything on my kitchen table. When I have a moment I'll put it through the DMM

 

[JTEX]

The first 10 probably means that you get 10% of the total value when it's at the half rotation point, measured between the CW lug and middle (it's the opposite of a log pot, which would be 10% measured from CCW to middle)

 

[StompBoxParts]

RD1M = Exaggerated C1M
RD sometimes styled as 10C

A=Audio/Logarithmic. 15% resistance @ 50% travel.
B=Linear. 50% resistance @ 50% travel.
C=Reverse Audio/Logarithmic. 85% resistance @ 50% travel.
D=Steep Audio/Logarithmic. 10% resistance @ 50% travel.
RD=Steep Reverse Logarithmic. 90% resistance @50% travel.
W=Logarithmic first half, reverse logarithmic last half.

 

[BuddytheReow]

Thanks. With my DMM it’s a C1M with an odd taper

 

[JTEX]

A=Audio/Logarithmic. 15% resistance @ 50% travel.

I thought the most common, garden variety log type is 10% at mid travel. Is this not the case?

 

[Betty Wont]

Reported for clickbait title

 

[swelchy]

I came here to see the POT

 

[StompBoxParts]

I thought the most common, garden variety log type is 10% at mid travel. Is this not the case?

Not in my experience BUT we put the taper specs on our website so that it is clear our regular A taper is 15%.