yazooligan
Well-known member
Congrats to the team on this! I wanted to make a modern pedal version of the X100 for years but abandoned it when I picked up a used X100 w/RockAdaptor for $150 a few years back.
Rockman X100 Rev. 10 Schematic Release
- Thread starter Cybercow
- Start date
drgonzo1969
Well-known member
still can't figure it out. I feeel real dumb. how do I strip the ".pdf" from the files?
caspercody
Active member
drgonza
These are ZIp files. Download a ZIP software, 7-zip.org.
Open up 7-zip and select the file and extract to any folder.
These are ZIp files. Download a ZIP software, 7-zip.org.
Open up 7-zip and select the file and extract to any folder.
Cybercow
Well-known member
They should end with ".ZIP" by changing the file name.(s) You may need to alter your PC settings to show the files extensions.
It's really that simple.
drgonzo1969
Well-known member
I am still getting an Incorrect format notification from jlc when I upload.
drgonzo1969
Well-known member
Ok I finally got it. Changing the PC settings did it. Thank you so much for your help and for the gerbers.
They should end with ".ZIP" by changing the file name.(s) You may need to alter your PC settings to show the files extensions.
It's really that simple.
caspercody
Active member
Cybercow
I was just wondering if you finished the X100 FV1 patches? I just finished my Binaura build and remembered your post about having patches.
Are your patches for the chorus or delay, or both
I was just wondering if you finished the X100 FV1 patches? I just finished my Binaura build and remembered your post about having patches.
Are your patches for the chorus or delay, or both
what about the comp mod? what does that replace on the original schematic?
Cybercow
Well-known member
The Comp mod replaces nothing. It's the simple addition of a pot in series between R14/R169 and the Test Point. Just above R14/R169, you'll see the B250K COM pot in the 1st schematic.