OD is Glorious
Well-known member
- Build Rating
- 5.00 star(s)
Being that I am a guitar collector the word burst has no place on a Tube Screamer variant. I guess this is a bit more than a YATS, I would call it an organic tube screamer... it is very dynamic and responds to attack. It certainly has the creamy-mids when you want them. I call this circuit high volume and low to medium gain. Turning the gain all the way just brings saturation not headroom. Turning the volume knob clockwise, the circuit gets quite loud at about 2:30pm... and it can deliver clean or transparent boost with the gain down. With the gain up it delivers crunch and eventually even-saturation. The tone knob adds sparkle or takes it away. So no surprises, it sounds very nice and I would run it on my board because the circuit gives me the ability to have more than one place to go.
Low parts count, and other than a 15n film capacitor there are no uncommon parts. I put this circuit in a white matte finish 1590b, added a decal and then clear coated with Spraymax 2k satin. I used the blue aluminum Davies 1510 knobs and a blue 3mm water clear LED (should have used a diffused bc it is bright). I used the low profile enclosed jacks and a Lumberg top jack. I used a soft click footswitch. I used short electrolytic capacitors - but notice i did not have a short 10u so I bent it over - there is plenty of room to do that.
Attachments
Last edited: