Five Cats Pedals - Morningstar Distortion - Revv G4

lund

Member
Build Rating
3.00 star(s)
The rather low build rating might be explained by a failure to plan ahead. I decided/remembered to mount the pots the other way around at the last minute. More about that in the report.

How does it sound?
This is a great metal distortion. Really useful tone controls, as loud as you want it, and the gain knob opens up a wonderful tight distortion. I think this is going to live on my board for quite some time. Strange enough I'm struggling to find words to describe it. It's over the top heavy distortion, and yet elegant somehow.

How good is the PCB layout?
Everything is well designed and marked. The huge holes for wiring takes some getting used to. Even if this build consists of quite a large number of components, nothing felt cramped or difficult to solder (which turned out to be a good thing since I needed to de-solder all of the pots.).

The board is designed for side jacks. Which is fine if you like that kind of thing. But since I wanted top jacks I needed to figure out a way to rotate the pots 180 degrees.

Five Cats Pedals, some great things, some things missing
The interactive BOM is amazing. A list of all components with sourced and placed check-boxes, which also light up the location of the component on the board on mouse-over makes keeping track of both sourcing and building really easy. I wish all builds had this feature.

I have never found any drill guides for any Five Cats Pedals build. This makes things a bit annoying since I cannot finishing up the graphics layout until I actually have the board in hand and can measure it. It also easy to make mistakes. The knobs ended up in the middle of the enclosure this time. I believe this is partly because how I measured things.

How was the build?
Except for my adventure in rotating the pots, and then squeezing everything in, which was absolutely horrible, everything went fine. Some boards just takes solder easier somehow.

To be honest, I probably would have been better off building the PPCB Sanguine Distortion version instead, but I don't even remember how the morningstar distortion ended up in my pile.

Image on pedal by Kim Diaz Holm

20261114_202308_0032.jpg
 

Attachments

  • 20261114_202424_0033.jpg
    20261114_202424_0033.jpg
    153.2 KB · Views: 18
  • IMG_20261114_135835.jpg
    IMG_20261114_135835.jpg
    101.9 KB · Views: 18
Last edited:
Back
Top