Mesa Boogie Five-Band Graphic Equalizer

disssa

Well-known member
I know there is a Vero layout for the Mesa Boogie 5-band EQ available online, and I know there are direct adaptations of those schematics.
I was intrigued by the idea of fitting the bulky original into a 125B enclosure without sacrificing the inductors.
The original pedal uses five individual inductors that require a lot of space. You can actually buy them, but they are quite expensive. You can actually buy them, but they are quite expensive.
vEQ_front.jpg
vEQ_open.jpg
 
I have slightly revised my version of the Mesa Boogie 5-band EQ to bring the result even closer to the original.
I replaced the multi-tapped inductor with individual inductors matching the values of the original.
5BandEQ_1v2.jpg
Now, the closeness to the original can even be seen through measurements:
5BandEQ.jpg

Since the black slider caps are hard to find, I replaced the sliders with LED sliders.
5BandEQ_new.jpg
 
I have slightly revised my version of the Mesa Boogie 5-band EQ to bring the result even closer to the original.
I replaced the multi-tapped inductor with individual inductors matching the values of the original.
View attachment 127887
Now, the closeness to the original can even be seen through measurements:
View attachment 127888

Since the black slider caps are hard to find, I replaced the sliders with LED sliders.
View attachment 127889
I see that REW measurement. It's really underrated as a stand in for audio precision's.
 
I replaced the multi-tapped inductor with individual inductors matching the values of the original.

Could you provide some information regarding the bobbins and cores? Are the smaller ones RM4 and the larger ones RM6? What is the permeability of the cores (material, e.g., N87, N30)?
 
Back
Top