Search results

My question to you is how many Components have been swapped out on the PCB ? Everytime you do this, you run the risk of damaging a Pad & Trace.

Your middle picture shows White wire going to Ground??? I suppose that's OK if your Input is still the same on PCB?, just confusing.

https://www.pedalpcb.com/product/pcb673/

He knows but it was on a different platform & he has to redraw the whole Layout when he has time! The current PCB has been around for around 3 years.

I have updated the Picture to current Paragon PCB which shake_appral has & he has C10 correct! It should be noted that some of the Older PCB's are first drafts on the site & don't match current PCB Available. Always go by what's on the PCB Board!

Both the Picture above & BOM show C10 opposite to what you have, BUT!!! https://forum.pedalpcb.com/threads/paragon-c10-orientation.20266/

They look a little worse for wear!, Some of Members here use Blu Tack to hold Components & them Trimmers in place til they get some Solder on em!!

As Member aj53202 noted above, Check your wiring! UPDATE: C10 has been corrected to match Current Paragon PCB.

There are Heaps of this PedalPCB board built successfully, so it is the Build that has the problem! If Jack wiring is wrong it will still work in bypass, More Pictures required!

You only need one! ;)

Sorry, what was your address?

https://www.pedalpcb.com/product/pcb676/

Here is a little mod I do to my cutter plies so I can strip the insulation also!

I use a Peak DCA55 that tells me most things I want to know. If anyone was to ask me should I get one, I would recommend the Peak DCA75, it reads jfet pinouts + more! If your building Pedals, it should be mandantory! ie if you put a Russian D9E diode it will tell you the Cathode line is Anode...

That's why I only use Paypal If someone asks for Paypal Family or Friends, you are not covered for a refund and you get charged the fee for using Paypal. I always tell the seller in these circumstances I will give them extra money on the standard Paypal payment method so I am still covered if...

When Continuity testing, you should have the power to the Circuit disconnected or yo will get a false reading. Also make sure your pots are somewhere in the middle as when fully clockwise or anti clockwise will give false readings!

I ordered these from a Online store here in Australia called Phipps Electronics, first & last time!!! As soon as I opened the packet, I knew they were fakes, JRC4558D don't have that Indent on the end! The Print is all wrong also! I contacted Paypal & they refunded my money right then & there! I...

Yes, I noticed that after I had posted & deleted that line but Chris had already responded why I was deleting Ha Ha!

if you have some Contact cleaner, squirt a couple of drops in the top of the switch while switching. It's what I use when I have pedals that have been sitting idol for long periods of time & get a static noise when first switched on again.

C, B, E on the Duocast.