Search results

Well it’s straight forward but here is the tone generator. Another very useful tool from PPCB. Those pedals that require you to strum a guitar and dial in the trim pot. This takes care of that for you. Run this to the input of your pedal then your pedal to your amp. Bam! That’s it. So it does...

This has been verified with a catch. All the pots and switches are plotted correctly. The jacks and cv hole will have to be drilled by you once you receive the box to verify proper placement. It is possible they will be added in the future but at this time thats the only way this one can be...

So I got this from Robert and thought I would tell you guys about it. If you don’t have a current meter this is a great option. If you don’t know what it does it’s simple. It tells you how many amps your pedal is pulling. This makes sure you are giving it appropriate power. While most pedals run...

Todays build is the Aionfx Andromedia. The Nobels ODR-1. This circuit sounds great and it allows you to roll back the bass from the original circuit. Its an easy build and sounds awesome. There is a reason Nashville folks use it. I just played with it a little bit this morning and there are lots...

Windex eh. I did the top panel in the sink and it’s great. The bottom panel I didn’t really want to have to remove everything so I have been using damp q-tips. It’s getting the dirt off but once it drys the shiny goes away, lol. I know it’s minor but it looks crazy good when it pops. It almost...

Is there any can put on the plastic to make us stay shiny? It really pops when it’s damp.

Cleaned up nicely. Now I am going to work on the bottom panel a little.

So this is my first Deadendfx build. I had been holding off doing any of theirs do to many of the projects I would be interested in have funky enclosure sizes that Tayda doesn't offer (meaning I have to drill). I decided this one would be my first venture and it was worth the effort. First the...

Now that it functions again cosmetic time, lol. Any good ideas to clean the outer grey plastic shield? It’s pretty nasty and I don’t want to damage it. The box has also seen better days but that’s not a big concern since it’s stable.

Fixed. Couldn’t go to bed without one more effort. The head needed to be cleaned. Works great. Very cool. Ty so much.

Its very possible its something simple like that. This was in storage for who knows how long.

Ty sir. I will check the wires and clean the heads tomorrow and update.

I will check the wires tomorrow. What is the best way to clean the heads? Isopropyl alcohol and q-tip? I have never serviced one of these so its all new to me. I am thinking of getting the kit to replace a few things from echofix. I am not going to do the caps though. If i needed a new head I...

Reading through the manual it shows you how to disconnect that. I found that interesting. I also found this excerpt quite funny. “If motor fails to start, slap sides of cabinet. This will realign bearings if unit has been roughly handled during shipment.” Thats one of the greatest things i’ve...

Nope I checked both modes. I read through the manual and followed it step by step to make sure i’m not a dumbass, lol. Iassume the head is some sort of magnet to erase the audio. Is there a way to test that? The audio thats on the tape is the same sound quality all the time regardless of mode...

Alright fellas. I cleaned up a lot of funk areas with deoxit. Changed out the switch and she has purred back to life. I can hear old stuff recording on the taped but it doesn’t seem to be recording at all and obviously isn’t erasing properly if I can hear recordings in a loop they are not me...

So based on the info you gave me it was made in the 43rd week of 1975. It’s honestly a lot cleaner inside than expected.

I must have this on mine!

Very cool. I am sure I will have questions as I go through it. I may actually start a thread when I get ready to catalog what’s going on with it. If not for anyone else it will be cool to watch my own progress.

How do I know how old it is? I did get it by the way. I started today by making sure the box is a little more sturdy. I used some wood glue and clamped it. Tomorrow I am going to put a few brads in it to make sure it’s nice and stable. I think I am going to start with a rebuild kit from...