Search results

If the emitter of q6 had good sound (left with flat side facing you) then the problem should be after that. There are only 3 parts between q6 and the output. These are R16, c1 and volume pot. Try probing these to see where the sound cuts out

If the bulb flashes but you get no sound then that is a clue where the problem is. Do you know how to make an audio probe? If so try to probe q5, q15 and q6. You should have sound on the collector of all of these (right side with flat face towards you).

It depends on the circuit you are using but I use a 1054 and 1044 as essentially interchangeable parts. There are some differences between them and I am sure there are circuits where they are not interchangeable, but I'm sure both will work in the sunflower. The main difference is that the...

I ended up using these jfets. Either I matched correctly or them being from the same batch were close enough. I now have a rad phaser.

Hey everyone I have been reading about the Escobedo Ugly Face. I really like some of the weird sounds that this thing can make, but i'm not really into the LMN386 fuzz circuit. Is it possible to add the Ugly Face envelope section to any other fuzz/distortion pedal of my choosing? Looking at...

Thanks. This makes me feel better. I tested about 15 2n5457s and they all measured pretty much the same. I assumed I was doing something wrong. Maybe not.

Did Did you match them or just use whatever?

Is the white here printed twice?

Hello again everyone. I have had a breakthrough with this project. As you can see from above the Timmy into wavefolder wasn't the best idea but not entirely wasted. I dedided to create a PCB that I can add onto existing pedals to give the option of a wavefolder. I haven't made the PCB yet but...

Try connecting pin 1 and 8 of the lt1054. I have had charge pumps whine before and this has fixed it for me.

For posterity. Yes this absolutely works. Thanks again Robert.

Are you sure r3 is 100k? Doesn’t look right to me but I have never seen green resistors. The red bands make me think it is a 22k.

I ave tried chrome before. It did look nice but got scratched very quickly

Thanks. I might need to get a printer capable of waterslide decals

I’m trying to get that polished rams head big muff look for the enclosure. Does anyone know what tayda has that looks close to that?

Great picture that she’s the finish off well. Thanks. Love the design too. That is rad

Wow that’s not right. It’s sorta cool though

Hi everyone. I just wanted to know if anyone has ordered the Glossy clear from tayda? I know there is a picture but I’m sure it doesn’t do it justice. Is it just a bare enclosure with clear coat over the top? If anyone has a picture they can show me that would be appreciated

Thanks for this!

Not really. I'm in Australia. So for 2 matched quads plus shipping its about $55AUD. Plus it's something I'd like to try my hand at. And I can put those other jfets to use. I'll add more jfets to the order in that case. Thanks.Might do an order of 50.