Search results

Hi guys. I'm having a problem since mounting the Kliche into the enclosure, so it has to be something with the wiring, but everything looks correct to my eye. When I tested the pedal on my protoboard, it worked fine (and sounded great). When I mounted it into the enclosure, I'm getting the LED...

I'm going to bump this rather than create a new post. I just completed this today and it seems both tame and a little scratchy. I did not have 1N34A so I used BAT41 instead. I have a ton of 1N4148, but read they could not be subbed. I'm going to clean the board with naptha, and reflow the joints...

OK, so now it's working, but the LED is not working. I changed out the footswitch, and the LED, and I get regular sound in bypass, and fuzz when engaged, but no LED to show me when it's active. And by the way, thank you all so much for the help with this. I really appreciate it. I know I must...

I'm getting nothing on either.

It is

Here is the power jack and connections

I just checked and the pinouts are correct (using BC108)

Sorry, I used an image uploader to add the pics, it must have added it. I'll edit it out. I have trimmed down the LEDs (I had them long so I could adjust to fit in the enclosure initially). I'm getting nothing at all. I believe the pinouts are the same, but I'll double check. I just reflowed...

Good morning all, Trying to build the Green Russian Muffin Fuzz. Not sure if putting non electrolytic caps in where it indicates to do so in electrolytic slots has me confused and making mistakes, but is there anything glaring here that I'm messing up on. Not getting anything on it at all...

I have a few 3 prong DPDT switches, could I use those in place of the 6 prong? Just solder one side in, or do I need the six prong?