Search results

  1. C

    SOLVED Rangemaster and Muffin Fuzz 2-in-1 with Order switcher

    welp everyone I had the biggest brain fart ever turns out my power supply wasn't on lol. jwin thank you so much for entertaining my stupidity.
  2. C

    SOLVED Rangemaster and Muffin Fuzz 2-in-1 with Order switcher

    redoing the offboard wiring on the muffin again. hopefully that might fix it
  3. C

    SOLVED Rangemaster and Muffin Fuzz 2-in-1 with Order switcher

    Cap values are good. And verified that I am plugged into the input
  4. C

    SOLVED Rangemaster and Muffin Fuzz 2-in-1 with Order switcher

    I recently finished up a Muffin Fuzz (Mask Us variant) and Rangemaster treble boost. I followed the 3PDT Order Switch Wiring and I'm getting bypass tone but when I engage the fuzz I get nothing and when I engage the boost I can hear a very faint signal with the knob all the way clockwise. Any...
  5. C

    Paragon Switch pop

    I recently finished a Paragon and noticed a popping noise from both sides of the pedal when I engage the switch. I understand that maybe this could be normal in KoT clones and in the KoT itself, but I was curious if there was any way to mitigate the popping. I reflowed my ground connections and...
  6. C

    Duo phase trimmer settings

    Gotcha! Thanks for the information I'll definitely read into it. Really appreciate it
  7. C

    Duo phase trimmer settings

    Just curious where it says that in the build doc?
  8. C

    Duo phase trimmer settings

    I also felt the same way haha
  9. C

    Duo phase trimmer settings

    Hello! Just finished my duo phase. Everything is working well. Just curious what the ideal trimmer settings are. Should I have each side at noon? Roughly almost all the way? I guess I'm not sure what the ideal settings are or if there are some builder favorites that people have discovered. Thanks!
  10. C

    Special Overdrive ODS

    I figured it might have to be R7 to change the gain and C7 to alter the bass. But I'm not sure. ODS from shins website says more bass and higher gain
  11. C

    Special Overdrive ODS

    Hello! I have 2 special Overdrives built and was curious what the difference is in the ODS version that shins offers. I was looking to do a dumbloid twin style build but I noticed the second channel is normally ODS. Any tips on how to get that out of the special overdrive PCB? Thanks
  12. C

    What's on the workbench?

    Any noticeable difference from the other Life Pedals?
  13. C

    SOLVED Abyss rate led stuck on

    FINALLY, so I grabbed a new rate pot and soldered it with wire, it's long but it works. Redid all the solder joints I can get to and it seems like it is finally working. Thank you for all the help. If I report any issues I will come back but hopefully, this thread is closed! Onto the next builds!!!!
  14. C

    SOLVED Abyss rate led stuck on

    well c9 is 100uf and i have 10uf, swapped that and no changes. it worked for a little bit and then stopped again
  15. C

    SOLVED Abyss rate led stuck on

    update, plugged it in and the rate was working for longer but I moved the PCB and it was intermittent when I moved the PCB around
  16. C

    SOLVED Abyss rate led stuck on

    did a reflow and now they are both around 50k
  17. C

    SOLVED Abyss rate led stuck on

    r17 and r18 are both 220k so that's good. Remeasured and got the same values as previous post, with the bottom gang around 68k
  18. C

    SOLVED Abyss rate led stuck on

    I think I might have a cold joint as well. When I try to measure resistance on the lug it works but when I measure it on the pad it isn't reading out or it bounces around
  19. C

    SOLVED Abyss rate led stuck on

    So they are not close at all. Top was at 219k and bottom was 67k
  20. C

    SOLVED Abyss rate led stuck on

    @Chuck D. Bones or @zgrav any ideas? I can send more pictures if you need
Back
Top Bottom