Search results

I am very proud of how this modded Rat (NO DUH) came out. Some value changes and a Filth control that blends between LED and Asymetric Si clipping. There is a lot of texture to play with here since the LEDs are never symmetrical unless all the way counter clockwise. I specifically wanted to...

Looks fantastic. Are those stamps for the letters and art? How significant is the change in the gain settings?

Thanks. I like the idea of using this on a wah.

Thanks. I get how to do the normal 3pdt. The problem is the best ones I've found (ilovemyswitches) are still pretty stiff to engage. So momentary/relay would be nicer. It does work i just wanted to know if I'm going to burn it out (x) latches from now without a diode/capacitor configuration...

I'm using it for the Slam switch on this delay

Doh! I didn't draw the momentary switch between 5v and +. Some days....

I dig the MONDO stripboard. Makes the toan bigger. 🤘

I want to put a dpdt switch into a pedal with a soft switch. It only needs to he engaged while pushed in. The relays i bought are for 4.5v but only engage with 5v. Go figure. So I stole 5v from the L7805>run to momentary switch>positive of coil. Also an led I may include but it's not needed...

Much appreciated!

Believe me I tried. Im sure it's somewhere obvious. Is there a schematic for the Basic Relay DPDT switch? Non latching. Im soooo confused trying to figure this out.

I have ordered both LMS and SBP. Both needed a lot of force. It looks this would be right https://www.mouser.com/ProductDetail/KEMET/EC2-4.5NU?qs=iaWy59%2Fd4KBum7GWD4q%252B2g%3D%3D But I dont know what kind of chip I need. For this particular project I dont need an led indicator. So could I...

I have a project in the works that needs a dpdt momentary switch. Its so hard to find one that doesn't have a very hard press so I would like to go soft touch. I saw this and would just rather build my own into my layout. https://mas-effects.com/digital-relay-switch.pdf Im curious too now if...

Just for completeness... C20 became 470n and C21 becam 15n for MORE BASS! R30 became 1k2 for more treble. At low gain it becomes useful.

There is a mostly complete report on this over in the mods section but here are the bullet points. The art is taken off a beer from There Does Not Exist. Art by @ibayarifins. Great beer, Great art. Mode switch changed to pot Octave blend added to remove octave completely at full ccw Bigger...

Great sounding pedal. My 10 year old populated and soldered about 90% of this. Graphic is a drawing into Ai and then photoshop.

I did play with this way of doing for a bit. I like it but the other way takes the octave all the way out like a kill switch would. It suits my tastes better this way. But I have a superfuzz build I'm thinking of implementing this in.

Mmm kind of. It oscillate but isn't really tuneable like the ds1. The more octave thats dialed in the more it gets choked out and makes what you play very glitch, almost like a broken tremolo. And then less octave equals screaming noise but also reactes to playing.

This is where my hyper fuzz is so far. I'm particularly interested in knowing if I can improve upon the octave blend. It works well though so maybe against all odds i did good. Gain changed to A250k for MORE GAIN. The Boost is skipped over so Scooped and Full can be wired to a B50k blend pot...

Sorry about the designations. I ment to clean them up so things went in order but I have to forget to something. :) Im not sure I understand about the moonn pcb though. To add the tilt you would have to add a daughter board. Im glad you mentioned moonn because I didn't know they had a...

Made one a long time ago and never connected with it. Recently I though it would be fun to take a swing at some redesign. Changes are circled in blue. C9,R20,C13 help nudge the sound towards a more usable verb without losing too much of the dba style. Feedback surge footswitch because its fun...