Search results

I have built a lot of pedals and all were 100% functional but I I just finished this Kliche and it doesn’t work. When the pedal is off the sound bypasses fine. When on the LED comes on but that’s it no sounds. Watch the video on YouTube for the visual details Video here Also FYI D9E diodes the...

can you send me a link to which headers you use

Does anyone know if this https://www.taydaelectronics.com/connectors-sockets/wafer-housing-crimp-terminal/serie-2500-2-54mm/wafer-connector-2-54mm-9-pins.html is the “9-pin 2.54mm Male Pin Header” that should be used on this? I have never used a pin header. I built mine like you see in my pic...

I did not and I should have. i assume the forward voltage may be high causing the bias to use the entire 5k trimmer??

https://docs.pedalpcb.com/project/Sunflower.pdf I built this Sunflower fuzz and went to bias it today and the internal bias trim is turned full clockwise abs the external sun face pot is at 3 o’clock in order for me to get 4.5 dcv. Is this normal? Seems extreme on the two pots just to get a 4.5...

Nice thanks I didnt look at SmallBear

I am building my first Doucast and the only part I am having an issue with is the BC549C for Q1 in https://docs.pedalpcb.com/project/DuoCast.pdf. What is the best alternative. I can get a BC549B but cant find a BC549C

It shows on their FAQ page they ship worldwide https://www.marktek.co.uk/faq

Did you design it yourself after contacting them?

What do you think they use then double sided tape to attach to the enclosure?

Does anyone know where people are getting metal name plates for the top of their enclosures like the one on the Protein pedal by Browne Amplification or the Broadcast pedal

Right. This is my plan

Nope just A or B. Let me conquer that first then I will get more complicated.

Yes that is what I want A or B not both so that diagram should be good no?

This looks like what I want

Thanks for the input about the DC Jack but as for the foot switches that’s not the way I want to use them what I want to do is use one foot switch to turn on and off the entire pedal aka both boards in it and use the other foot switch to switch back-and-forth between each board like an A or B...

I was wonder is it possible to put 2 pedalpcb boards let’s say the SD1 and bd2 like boards in 1 enclosure with 1 in and out and 1 dc along with two foot switches. One foot switch to turn on and off the whole pedal and the second foot switch to switch between the 2 boards. what I do t know is...

Thank you I just ordered these from guitarpcb

Thanks but I am in the US

I see that. I have never done it before but after watching a video it doesnt seem to hard. Wont know until I try