Search results

I'll probably go with UNI-T UT139C

Roger that! Any other essential functions I should shop for?

This is very helpful, beautifully coherent! This looks like a job for multimeter. Can I do this with my audio probe? I feel like I’m one wire short. But I’m buying a multimeter on monday.

C1 both sides good, C2 no sound on any side.

After I finished soldering, I did not clean the flux on my board whatsoever. Is it possible the tips of solder are covered in flux, hence why I don't get any sound sometimes? Anyway, I went through all the parts you listed and here's what I got. Green for sound, red for no sound, obviously.

We already went through this with other advisors. I had two J201s and no 2SK208 which was why I was getting no sound. I took the J201 out of the socket and put in the place of 2SK208, which (I was told) is equivalent. After that I got the pedal running. Here's a photo of where I am at now.

When I fed the pedal with my adapter and engaged the pedal, some of the footswitch pin started to make a sound and those that did make sound previously then died. Guys. This is very overwhelming. I can't follow the schematics.

I think I figured it out. The former is the correct way. So what I've found out. The probe only makes sound when I touch the signal pins for input/outputs and their respective wires and I also get a sound on the footswitch, on the pins in black circle, the rest of the FS is dead and so is the...

I'm sorry but I just cant figure it out. I have a probe. I have a signal source. What do I plug to what? I used my chase for the ground of the probe, the sent audio signal into the probe and then a cable from pedal output into the amplifier. I only got a sound when I touched the tip of my probe...

So I started with the looper and BBD trim pot and I noticed it only affects the wet signal. It had absolutely zero effect on the dry. Is it how it should work? Anyway, even when I unified the wet and dry, they were significantly less loud than the through signal with the pedal switched off.

I also started with both dip switches off as per the tutorial. I'll give it another try before the audio probe. I have my trusty UR22mkII and Ableton so I'll use it as a makeshift looper. Thanks for the tip!

Okay, that looks like a real challenge but I have all the time in the world. Thank you

Could you recommend any tutorial on how to use the audio probe in such way?

I slowly get the hang of it. I even tried to replicate the settings from a Shallow Water demo and I got the exact sound out of it! Following the guides I managed to fine-tune the gate trim pot to where I like it but there is something that bugs me. The pedal bites a significant chunk off of...

I actually did give up but you guys brought me back!

Haha, I heard this song couple days back in my local café, really like the kinks version too. I have a suspicion something ain't quite right but I'll leave it be for today. This is so much fun. I'm honestly happy for the complications. Any tips for where to further educate myself on this...

I'm messing with the trim pots and controls. I'm not sure if it works correctly because the controls are pretty wild but the more I watch demos and replicate the settings the more I'm confident it does what it's supposed to do. I'm almost in tears, goddamn it. I will learn how to tame the...

Gentlemen. I got it running.

Well, I might have already burn the SMD then. We'll see. I think it will be actually easier to remove the J201 because I sat it in a slot. I have extra slots to use so I can basically put it from slot to slot. I don't feel like messing the SMD to be honest. Too tiny.

So I can remove one and put it in the place of Q1, right?