Search results

hello i would like to know something about the intelligent relay bypass Do i have to buy a Panasonic TQ2-L-5V relay or can i replace it by another one ? If someone has tried this relay pcb, would i have a review about your experience with this kit ? ? best regard

do you have make some positive results or enhancement on this trail + bypass pcb ?

now when the outjack is not connected the pedal turns on i think it was only a dc adaptator bad soldered problem i m stopping the researches for today because i think i did all the stuffs that you ve given me as an advice !! and i would like thank you for the help there is no measure...

the measure of voltage between r7 r16 r17 and pins16 17 18 are excalty the same written on the databoard the diode 1 - 9 (1n914) on the good and non functionnal one are the same volt results with all the poles

okay i m gonna measure the pin 16 17 18 with R7 R16 R17 on the good arachnid which works...

@Chuck D. Bones i did as you told me i measured the voltage between the pole1, 2,3....8 and the fv1 pin3 and pin 4 for the measure pin3 and poles 1 to 8 V=1.60 pin4 and pole 1 to 8 V=3.3

hello Chuck D. Bones thanx for the awnswer i made some measures lets see the jpg i am not able to decode this excel board data for me the ohms were never in negative measure...could you tell me why there is some negative numbers ? and also one thing : if the outjack is not connected...

of course and i also uploaded a video on youtube the last one (the pcb on the enclosure - img_20191022_151212) was the first arachnid i soldered on october and it works perfectly - all the mode are available i must have done some exchanges of some components between the blue good one...

okay i reflowed the pin 16 17 and 18 and this is nothing which changes as previous, i ve only got 4 modes ... the 1, 2,3 ,4 then once again, the 1, 2 , 3 , 4 i tried a lots of things, remplace the TL074 the L78L33, switching the EEPROM do you think that some capacitors could be...

hello okay i will try to reflow the 3 pins but im not sure about the result !! and thanx for the informations about my wrong reading of the pinout i will tell you if it's would change something for the measures, i put the ground of my multimeter to the dc socket ground and with a voltmeter i...

the rotary 8 position switch is working also because i verified all the positions and the value is 3.3 on all the 8 pins

i verified all the welding points and all the connections with the wires ...all the stuff that i could understand

yeah i tried this tip and on the first arachnid i soldered, it works perfectly this is not a EEPROM problem because i also have the module8 eeprom and it works on the module8/arachnid pcb that i first bought and assembled 3 months ago

hello i assembled and soldered a arachnid its the second one the first is working perfectly but the second has some trouble actually, there is only the 4 first modes who are working the 5. 6 .7 .8 mode/presets are the same that the 1 ; 2 ;3 ; 4 Is there some o,ne who figured the same...