Search results

Is the 7809 was hot? Maybe it need an heatsink at higher voltage? Not sure, but... what about the current consumption? At 24v you need too much ampere for the 7809?

I hope I'll not have noise issue with a PSU I'll buy then.

I'm searching a laptop PSU to buy, at least 19v and 3A, I'm not sure if I have to use 24v, because that is close to the limit for the TPA3118. Do you have a brand or model in particular. Did you have pictures of your PSU used with this kind of power amp?

Your built it's very nice. I prefer to use the smaller 60w version, but... you used a battery? I think a PSU it will be ok for me.

These are the PCB board I can find: https://www.ebay.it/itm/154122973822 https://www.op-electronics.com/it/amplification/679-tpa3118-mono-power-amp.html Amazon or AliExpress, too. There are a lot of of these blue board, I think those are all the same board. It's very simple: One Input, One...

I still have to buy the TPA3118 PCB, and the PSU. But if that's enough to solve noise issue I have a pair of big 4700uF. So, in case I could add a sort of noise filter with a 1N5817 in line, a big electrolytic cap and maybe a smaller ceramic cap. By the way, I'll buy, I have to decide where...

A laptop one fore sure, I'm afraid to buy one and found it noisy, I wrote it everywhere. :D I got some suggestion, but I can't to buy exactly the same model in the shop available in my Country.

I want to bump this my topic (that I forgot) because this year I would like to buy a TPA3118, but I afraid to buy any PSU. So, if the PSU you used work fine without any noise or issue and I can buy it on amazon or ebay in EU, I'll be glad if you suggest the model. Thanks!

Thanks for your reply. I have two question: one about the speaker, seen the higher wattage I could get with this amp than my 1w - 2w amps I built until now; and another one about a good and right PSU to use with it, being laptop PSU are not made for audio application, though volts and amperes...

But, if I supply the TPA3118 at 18v (and that could be even something more) it should be over 15w output power, isn't it? I thought it was a problem for the 15w speaker. I want to be very careful with it, because the speaker it's very low cost and the cabinet it's just a wood box I found. If I...

The newx year I want to buy a TPA3118. I looked at that for a long time. To make it sounds good and reasonably loud I hoped it was enough put in front of it a kind of preamp like Dr. Boogie or Tight Metal, or something less distorted like a Guv'Nor or a Bluesbreaker. And of course a clean preamp...

On my breadboard there's today a TBA820M amp, schematic from the datasheet. There are two kind of schematic: one with the voltage on the speaker and one with the ground on the speaker. I tried the one with the voltage on the speaker. It sounds, but I have to talk about a weird things. Usually...

Thailand Post delivery is available in my EU country, now. My cart is around 0.53 kg, about 54 $ of material and almost 21 $ Thailand Post delivery. Probably I'll add something else. No DHL, so I should pay just the VAT because in Italy under 150 € I have to pay just the VAT. Should I expect...

If we will pay a charge of just 25% I think Tayda could be still competitive. Of course today we pay more than the past, but a lot of stuff on Tayda costs even 50% less than other shops. Maybe with film box caps or some IC we save just a few of cents, so we don't save money buying that stuff...

Do you remember the weight of the package (in the Tayda's cart is indicated)? Or the dimension of the package? Box of bag? Maybe all this thing are important to calculate the fee. Anyway, I think you're said right, Temol, my math early was wrong because I thought it was 30 $ in total, instead...

Honestly, I don't know. Sorry.

OK. I need some math (and French lesson :unsure:). The total to pay is 25,50 € (about 28$). 25,50 € = 17,50 + 8. But how we can calculate these number? What's 2,92 €? PS The description (potentiometers, diodes, inductors) it's because the package it's been open up and check up? Maybe to control...

If you want to add taht one band parametric circuit you can do it, and with it you can boost and cut a certain range variable frequency. I can suggest you to change the C6 with a 4.7nF to get a basic sound with a more flat mid, then use the one band parametric eq to shape the sound, but I can't...

Well, the HM-2 with bass and high boosted has a mid scoop sound, and the FY-2, I see from the schematic, has a notch in the mid frequency. But, if that is not the thing you're searching you can fill the scoop putting between C7 100nF and the ground a 3.3k resistor, for example. Or you can...

For presence frequency I mean higher frequency, but I play guitar and I don't play around bass pedal too much, so I don't what works fine and what works bad. When you increase C5 you will cut less bass. Using a 100nF the difference in the low end should be substantial, at least around the 100Hz...