Search results

I almost don't want to post it here, because going through it is just a great way to learn... like buying a 250V or 500V capacitor and then having them arrive and being too big to fit or trying to hyper optimize to reduce on shipping only to have bought 2 knobs instead of 3, so back to another...

This would be a fun one to audio probe to debug! Really easy to make one with just a capacitor

Looks nearly identical (bad logo, similar date code) to one I had a problem with from tayda, I vote fake https://forum.pedalpcb.com/threads/checking-for-fake-opa2134.4101/#post-298175

Also, pluto looks to not use the bootloader, but mercury does, this means different checkboxes on the web flasher or different (an additional) command with the CLI. Let's just stick with trying to get mercury built and onto the daisy first, even though it is the minorly more invovled one due to...

Did you do cp mod/daisy_petal.* libDaisy/src/ Before building libDaisy?

You installed this, right? and then added it to your PATH https://daisy.audio/tutorials/toolchain-windows/#toolchain-installer does this work: where arm-none-eabi-gcc arm-none-eabi-gcc --version

@temol Here is what I just did for you on my mac (and I attached the .bin to this post for you, rename the .txt to .bin), building on windows is definitely going to be a bit more painful than macos or linux. If it were me I would toss these directions into an LLM and use WSL (basically gives you...

Ok I am all set! https://github.com/xconverge/FunBox/tree/tweaks/software/Mercury - I made it not a submodule so that it was easy for me to mess with - I added my preferred BE100 high gain profile - I added a crybaby wah pedal implementation for the expression pedal I am now in full rage...

I swapped daisyseeds with no change. Again the bypass sounds PRETTY good and doesnt have the whine I was hearing. (With the help of some LLMs) I got to a working solution for my needs though! I captured the output from the pedal into my DAW to view the waterfall and was able basically fully...

Fixed the input/output jacks to have the enclosure properly grounded (checked before and after with a multi-meter), no difference to the noise I am hearing Tried a tl074 instead of the mcp6024, no real difference I could hear The noise is pretty minimal when the effect is bypassed (I tried...

I finished my funbox build and unfortunately the noise level/high pitch sound I am hearing is a non-starter When I find a few more minutes, I will swap the daisy with my other one from my kshep pedal and see if that changes anything I wanted to comb over the schematic and any other potential...

For those kewpie fans, can anyone elaborate on the mode/URA switch at the top a bit? for my high output humbuckers, if this switch is down or off, I overload the circuit with sustain like at 9 o clock. It gets REALLY muffled/boomy/and seems to maybe be clipping pretty badly (does not sound...

Also late to the party, and not exactly what you are looking for (least intrusive) but I fixed my behringer BDI21 by adjusting the capacitors in the switching circuit Mod #2 in this article http://www.geofex.com/Article_Folders/bosstech.pdf I didn't have luck swapping the capacitors, so I just...

I just ordered 5x PCBs also (JLCPCB Order Total: $5.85). I have been loving the BE-100 NAM profile and wanted to basically just make a dedicated pedal for it!

If I have a muffin fuzz (built the Stomp '75/Violet Ram's Head variant), and it was my first fuzz ever, would building a Kewpie be dumb? I am also considering a carcosa. I run it boosted with a plumes and really like it, but find I need to dial back my guitar volume (I have hot humbuckers) a...

Yea I was considering an automated pipeline for recapturing/retraining with existing models like you mentioned using NAM to playback

I have all of the captures from it (https://www.tone3000.com/tones/marshall-jcm800-2203x-27847), I wasn't super into it compared to the BE-100, it didn't seem to train with the low fidelity/parameters as nicely either I did the Sansamp BDDI myself just because I have one and wanted to do the...

Another option, I asked nicely and sent a small donation as a thank you, to someone for their original captures and then retrained the models with the lowered fidelity/parameters for an amp I was interested in. https://github.com/bkshepherd/DaisySeedProjects/pull/69 I considered distillation...

I really enjoyed Geraints talk, I had a branch at one point starting to try and use the signalsmith-stretch algorithm on daisy but it just wasn't going to happen IIRC

A lot of options but you want to build with debug symbols and then attach the debugger, and leave it running for a few hours and come back to it and see the stack trace when its crashed. There are a lot of other options but this is my favorite/preferred way, I would experiment/play a bit to make...