Search results

I ❤️ SMD

^ Great write-up, I wish I had the patience to do something like this. The contribution of resistor noise is important and often overlooked in audio designs. A seemingly benign, mostly useless "current limiting" 10k resistor in series with a TL072 noninverting input degrades the noise floor by...

How much cheaper can they be than the $0.30 MMBFJ201, available by the boatload from major distributors?

Discerning, gentle electrons will never be seen in public going through anything less than truly vintage carbon-in-bee's-wax resistors.

It's not true bypass if there's any load on the signal from your circuit. C6/R102/R101 is a load.

Yes, I meant audible.

The more I look at the original Klon schematic, the more it looks to me that things are likely to get scratchy when turning the gain pot. An opamp gets its DC bias through a pot's wiper. Been there and done that in one of my (completely unrelated) designs, and guess what? It was scratchy, even...

Just looked at Kliche Mini. I'd guess that it's mostly the gain pot that's scratchy.

If there's any DC across an audio pot, it will likely be scratchy even if brand new and good quality. Or, if there's no DC, you might have simply bought some crappy pots... What's the circuit?

Why not just do a passive split? A single op amp output can easily feed several inputs. I'd just use a separate series resistor for each output, perhaps on the order of 1k, so that if one of them gets shorted out it doesn't cut the others.

It won't come back. Next time try to apply Deoxit only on the resistive track if you can. I even made custom, tiny nozzles from syringe needles to be able to aim more precisely. If you spray too liberally it can get inside the shaft where the grease is, and things will get loose. Having said...

Hopefully you won't get any interference from that display going into the audio. I bet it will require some careful PCB layout. I would definitely try some high gain pedal after the tuner to make sure there's nothing audible when the display changes.

Do a quick scan through the catalogues of reliable, first-tier distributors: DigiKey, Mouser, Newark, and also (or even especially!) Asian-based ones such as LCSC. If none of them list germanium transistors in stock, then you can be pretty certain that nobody currently makes them, or you'd find...

I might get (back) into pedals once I retire, which should be in about 586 days. IF, of course, pedals are still a thing by then... But, I mean, why would the pedal market need yet another maker? There's already 100 variations of every pedal known to man, and some of them cost peanuts and work...

Basically mixers in a pedal format. OK, I should stop trying to come up with new stuff. Every single time, somebody beat me to it. Except for that anti-flashlight. You shine it on something and it goes dark. Problem is, the prototype isn't working yet 😒

I doubt you'd notice any coloration from either option.

Compared to a (good) op-amp buffer, this will have: - less headroom (the output can't swing rail-to-rail) - more distortion (if it matters) - much poorer power supply rejection (if there's noise in the power, it easily makes it into the signal) - higher output impedance - depending on the...

Is there such thing as a "clean blend" pedal? Like, its sole purpose would be to add the option of a clean blend to some other pedal that lacks it? With a polarity reverse option, of course, to accommodate all situations?

You also tried a battery and still getting power supply noise? That doesn't compute...

I usually go straight to LCSC to search for parts to use with JLC's assembly. Much better interface, but I often end up using non-basic parts that incur the extra fees for loading into the pick-and-place machine.