Search results

I’ll be able to check this in the morning, thank you for your help.

Sorry, toward the 2399.

It’s the leg of R16 labeled 2. I’ll check the possible bridge, and I know C101 is soldered, but maybe not great. I’ll fix it.

This is all good advice. I reseated and tried a second IC, and I tested all the resistors and they were the correct values. This may be a dumb question, but the side of R16 that I lose signal seems to have continuity to ground when the effect is on. Should that be the case?

I ended up reflowing the whole board just in case with no change. I appreciate you highlighting the signal path. It for sure goes quite after R16. IC4 has 5v in and that all seems right, but no signal on pin 6 or at R10.

Hello all, I want to take a second before I start to thank everyone on here for being so helpful when you don't have to be. I've learned a lot and I really appreciate it. I'm building a spirit box and there is no reverb when I turn the pedal on. the LED lights, I loose a little bit of volume...