Search results

Yeah, the middle setting is the mild setting. I don’t even use it.

That is admirable dedication to a theme😍. I wonder if there’s an on-off-on version of this… https://www.taydaelectronics.com/seales-mini-toggle-switch-1a-series-dpdt-on-on-short-lever.html

Will communicating from the Upside Down Up North…

…and I don’t have the expression pedals… To be honest I just want to populate it, but not actually do the drilling through testing parts.

@Govmnt_Lacky at the madbean forum has. I’ve considered thinking about wanting to maybe trying it myself.

Go with what you can get from your favorite reputable source. Especially if you’re making a distortion or fuzz. That’s not about Fidelity.

100% this^^^^. Electrons can’t read brand names. Focus on making clean repeatable work.

I’ve never had an issue with anything from pedalhacker, but I also don’t believe in magic diodes and don’t play that game.

You got them from a couple of the most trusted sources available for new old stock parts. I would have no trouble trusting the authenticity from them. I think the only other thing you could do is ask the vendor to show you the original packaging if they have it.

If they work, they are legit diodes. It looks like you are asking if what you have is a certain brand of them?

I found some on Ebay using the search term "axial multilayer ceramic capacitor".

They are axial (usually ceramic) capacitors designed to be installed by pick-and-place machines. Any capacitor type should sub fine there.

They appear to be pretty standard silicon diodes. And both of those are very trusted vendors. You could sub 1n4148 for them and get the same results a lot cheaper. You can use your DMM to check that they are functioning diodes.

Imagining is not science! I’ll try again…. Was your pcb labeled with buffered bypass pads or true? How did you wire the foot switch? Both types have different wiring schemes. Pictures are a basic requirement for troubleshooting. The charge pump and those pads are not a concern (yet)

If it’s a true bypass effect and you have no bypass, that has nothing to do with the PCB. That’s going to be wiring or your foot switch.

Is it possible your polarity protection diode is dropping the voltage? Bad/wrong part? I’d start there.

The switch works either way you install it.

It was tossed out by Gener at this show: An outdoor daytime show at the bird amphitheater at the zoo a few days before my 21st birthday.

Hey @Bricksnbeatles, check out what I found in an old shoe box!!!