Search results

I've completed my unicab build today, sounds great. I used a hammond 1550B enclosure, not a 125B.

Thanks!

Thanks, I got them from a local dealer here in germany. These are vishay dale resistors (cmf-55).

Thank you!

Thanks

Thank you! Yes, but the fat setting is around 12 o'clock with the C-150K pot. You have to reduce the resistance for that. At 12 o'clock you have already 85% of the total resistance (rev log).

I used alpha potentiometers (pcb mount). These pots have 20% tolerance. I used a W20K (mesured 22,8 K), thats close enough. The C150K pot was a standard alpha pot, I modified it with wire for PCB mounting.

Thanks!

Thanks!

Thanks:)

Thanks!

Thank you! It seems to sound like the A Side of my kingtone duallist, thats my first impression. I will make a A/B test later. The reason to build this project was to have the extra body control and the edge setting.

Thanks! Yes, I soldered them together with one ground wire connected to the board.

Thank you!

No, it's a standard black powder coated hammond 1590B enclosure.

Thanks!

I finished my lone king overdrive pedal project today. I used a Hammond 1590B enclosure, not a 125B. It was annoying, but it works ...

I've used the original analogman k.o.t. v4 schematic and changed the paragon power supply with four jumpers. I soldered a 1N5817 diode directly to the power socket +9V (D7, D14, D15 are jumpered). Just like analogman I've used two electrolytic capacitors 100uF/50V for the power supply. C21/100uF...

I wish I had done it also that way, another new inspiration ... next time.