Search results

Where?

Sounds like an awesome hardware store.

I have some of the Taydas that worked well (I guess, nothing to compare to) in a duo phase. What would be the optimal LDR? IDGAF about cost. EDIT: You already answered the question, thanks.

Got two boards ordered. What bulb is needed? Which LDRs? If the answer is STFU and wait for the build docs, then that is what I will do as a I fantasize endlessly about the warbling swooshy tones to come.

Did the output jack twist to where the tip connection is touching the enclosure? Also, is there a little solder blob between 2 and 5 on the FS?

I'm embarrassed. Since the problem seemed to be intermittent, I focused in with a magnifying glass on my soldering and found a shitty solder on one of the E caps. Fixed that and we have lift-off. What a circuit!! Now I need to build a few for buddies!! Have a gig tonight, so I'm going to...

I'm back, damn. Drinking some craft beer. I boxed it and of course the problem reared its ugly head again. I de-boxed and went through everything. I noticed something odd, which is the only place on the entire circuit where the layout is not exactly symmetrical: R38B is 68K, and R46B is 3k9...

I was using electrical tape, but it is green and leaks light. I tried a beer bottle cap (have PLENTY of those floating around in the garage) and it was too big. I am honestly digging the sock idea beacuse, well, it's a sock. I guess I might have to grab a sixer tonight in that case.

False alarm. It works perfect. Time to drill. I started to take voltages, and noticed a funky looking chip. I had broken the legs on one of the 072s during install. Popped a new one in and all is well with the world. I love this thing. I used tape to cover the LEDs and LDRs. Some light...

Hello harmonica enthusiasts. So I got the 7660scpas and that took care of my noise issue. Now I have another one. Phaser B is tits mcgrits. I got it all biased up and it kills. Phaser A is being an ass. I get a very loud cop siren or car alarm sound. Biasing changed the frequency...

Just checked, They are7660cpa. Will order the correct part and report back. I have heard funky charge pump noise before, and I suspect this is the issue. Thanks for the quick reply.

Yeah dude, rock it.

The middle lug on the B50k pot on the right of your pic looks like it could use a re-flow. Glad you got it working!!

I have built 70 pedals or so, but mostly 808's and various other simple overdrives, phase 90's, PT2399 delays and such. I decided to man up and build this beast. Given the complexity, I have not boxed it. I ran short on TL072s, but had enough to get one side working. I am getting the most...

I personally almost never use them. I got my start building BYOC kits, and they have you wire direct to the footswitch, so I got plenty of practice. The boards look nice, but take me longer. The wires can be run neatly either way IMHO. I would suggest an clickable option to buy the board so...

I want to build the Mini, but it's not in stock. The Clean appears to me (verified moron) to be the same board with some different values. Could I buy the clean and use the build guide from the mini?

Thank you buddy. I will socket and see.

I am going to build it tonight. I don't have the Zener Diode on hand. I assume that is just a protection diode? Could I use a 4001, or just jump it if I'm not worried about it getting above 9v power? Also, I find the volume on Klonish circuit to come on very fast with the B10k volume pot...

Thanks to all that replied. The pedal is a lot of fun, very cool sounding ambiance. The FV-1 was challenging, but I think I learned enough to not be scared of these in the future. I did have to use my desoldering iron a few times to clean up some solder bridges.

Thanks Nostradoomus!! I re-flowed pin 20 and it's working. Thanks a million.