Search results

It makes perfect sense to a lefty (y)

Be careful soldering in your bike shorts!

IMHO it's probably not cause for concern yet--last package I orderd from alexer1 took that long. With Russia's indiscriminate attacks on civilian infrastructure, it'll happen. Also, one UA seller (Nevidomuj, I think) sent stuff in bulk to a Minnesota address, where it shipped from. USPS has...

The TC-1 should have a built in google search feature :p

Near-faulty-to-fully-borked transistors will do that. Interesting Vfs though? Maybe try warming it up with body heat and see if it reads as transistor--it would at least clue as to which lead is what. In any case, it probably belongs in the overflowing bin of "these dead transistors will work...

I like to use this string tension calculator: https://rodrigocfd.github.io/string-tension-calc/ It uses the string data from D'Addario and probably extrapolates it to the other brands. My LGS uses EB for singles and I consider them close enough to D'Addario for it to not matter. I get the...

That's basically what I use (1.5 & 9mm) except for pots and switches, which need to be bigger.

Are you also changing height? It does width and height separately, in order to make oval/oblong pads.

Only one way to find out! If Ge Vf is around .3v, and a red LED is around 1.8V, it's still pretty asymmetrical with .6V against 1.8V. If you haven't seen this video from Arito Suzuki, it does a nice job of demonstrating it in soft clipping mode. I would expect the differences to be more...

Somebody correct me, but isn't the asymmetry in asymmetrical diodes just about the total Vf in each direction? Ge diodes will have their distinctive character of course. I would expect that 2 series germaniums would add up to around a third the Vf of a red LED. It would be interesting to look...

JLCPCB has a Gerber viewer once you upload the zip file. There are a few (mostly other board fabs) among the top google results for "gerber viewer."

If you haven't found it already, you can right-click on a pad, choose Pad Properties, Type/Dimensions tab, and uncheck Use Pattern's Standard Pad Properties. The window will change to let you adjust the dimensions of the pad and the hole. You can even apply it to all of the pads. It's a killer...

IMHO a fixed tele bridge is nice to have with a baritone, because you can get a little more range for intonating when you want to change tuning/gauge.

NB @jimilee's Super Rat has an IC-clipping-only option ;)

I'm using EB "Not Even Slinky" 12-56 for B tuning on a 28" baritone. Actually I swapped in a 24 wound for the third string. OK, and a 58 for drop A tuning.

I've looked at those a few times too. Next time I order from Jameco I plan to pop one in the cart and see. I don't see them at Cabintech, but Retroamplis has some.

At risk of causing another stampede... ... I recently bought four from Retroamplis. They're at least single opamps (different date codes) and sound fine. They were the last ones in the third of the three different LM308 items that are listed there now, so YMMV. If you're in New England, I...