Search results

Here's my second build, using the BLMS limited run enclosure. I think it looks significantly better.

You mean a Burr-Brownish flavor?

Looks great! Have you by chance measured the current draw with either and both channels on? I’m curious how much current the optical bypass requires.

@disssa - the last picture in your first post shows the "innie" DC jack soldered to wires, which are in turn soldered to the PCB. I'm guessing you had to un-solder something and re-solder during final assembly? Great looking build and PCB!

Thanks! The Cast Iron is indeed a Timmy with an active mid control. But the MT-10 Mostortion (aka Misfit/Oxide/Quantum) isn't really a Timmy derivative. At a general/very high level, they are all diodes in an opamp feedback loop clippers, but take a different approach to tone control. The...

I reviewed my order history, looks like I only ever had a single 3260. That was from Mouser, back in 2020, part number 968-CA3260EZ (this link might work). But Mouser now shows that as "Restricted Availability: Mouser does not presently sell this product in your region." (My region is...

The AionFX Quantum is yet another PCB for this circuit. I built two of those back in 2020. I ultimately sold them, then later decided I wanted to revisit that circuit, so I built the PedalPCB Oxide. Fun trivia: the Karma MTN-10 is a current-production clone of the Ibanez MT-10 Mostortion...

I've really been loving this Effects Layouts Spice Runner (based on the Way Huge Saucy Box) that I built recently. Enough that I felt the circuit deserved my custom PCB treatment. Here I present my "Gigantic Sauce Container". The circuit is interesting in that the drive knob is a dual-gang...

Side jacks on a 125B? Blasphemy! I’m just kidding of course! That’s one of the things that makes DIY so satisfying, you get things exactly like you want. Absolutely great great looking builds, thanks for sharing!

At first I thought that 1n5817 was a MELF resistor.

Bump for Edit 3, where I added a second build with this custom PCB.

So this is definitely a keeper for me. For now anyway, it's replaced my "Egregiously Expensive Crunch" (Cornish CC-1 clone). Having spent some more time with it, I don't think it's quite as EQ-neutral ("transparent") as the CC-1. Specifically, I think it might actually cut a little bit of...

For that, I actually use double-sided foam tape.

Sure! See here: Buffered Electrical Bypass Module. I can't afford to give these away for free, but if you want to try one or two, and live in the USA, PM me and we can probably work something out. I do have spare through-hole PCBs of this circuit that I'm happy to send out for free.

I've now had a couple requests for the Gerbers and other files needed for the SMD board. So, by popular demand, I'll put these out for everyone to use. I had these fabricated and SMD assembly done by JLCPCB. The first four files have a .txt extension that I added only because the true...

Here is my build of the Effects Layouts Spice Runner, based on the Way Huge Saucy Box. From what I've gathered, based on Internet hearsay, this is a simplified version of the Way Huge Pork Loin (for which PedalPCB offers a board, the Lamb Chop). Just by looking at the schematics of the two...

I'm assuming it's the CD4069 and TQ-2L-5V bypass discussed here and here?

I assume the second PCB that’s mostly hidden behind the effect PCB is some kind of bypass circuit? Curious about its design.

I was looking at the schematic for the PedalPCB Lamb Chop, which is based on the Way Huge Pork Loin. See also the Effects Layouts Spice Runner, which is based on the Way Huge Saucy Box. Internet hearsay suggests the Saucy Box is a simplified version of the Pork Loin, and a quick glance at the...

I'm sure most of us have encountered a build that required a trim pot: a small potentiometer that is soldered directly to the PCB, often intended to make some one-time adjustment that accounts for variability in another part of the circuit (e.g. bias), or maybe some kind of tuning that is...