Search results

I don't know yet. The PCB is currently en route. :cool: Currently putting parts orders together, but I'll let you know when I finish the project.

Digi-Key has some helpful conversion calculators on their website. I refer to the capacitance chart often. Conversion Calculators

That’s what I’m going to do.

I was wondering the same thing, so I experimented with some 5mm Yellow LEDs, a CLR and a 9V battery. I found that 2 LEDs in parallel affects the brightness a little, but the difference is hardly noticeable when connecting them in series. I also tried a 5mm Red LED with a 5mm Yellow and had...

I know this is an old thread, but in case anyone is still following, I found a YouTube demo where the builder has a pulsing rate LED on his pedal. Bloomin' Vibe Demo // EQD The Depths Clone Someone asked in the comments how this was achieved, and the builder replied, "it's quite easy. the...

In case you are interested in doing any mods, here's an article from Brian Wampler on some good mods. 5 DIY Mods to Perfect Your Ibanez TS9 and Boss SD-1 I did the gain/bass boost mods on my SD-1 and made them switchable. Also changed R5 from 33K to 10K to allow the Drive control to clean up...

I was wondering the same thing since all the build reports show manual wiring (how barbaric🤣).

I know this is an old thread, but I was trying find similar info and found your input helpful, so thank you! I believe this is the video you referenced for anyone interested.

I actually selected the signature release option but the driver was lost and called me, and I was home, so I got a photo op! ;)

I just got a shipment from Tayda yesterday and this is the proof of delivery shot the DHL driver took. I thought it was pretty funny, like a kid in a candy store! :LOL: Time to build some pedals!

Thanks! I’ll try both header options since these parts are inexpensive at Tayda. In the meantime, I’ll search the forum for light shield ideas (hot glued bottle cap lined with foil?).

I'm currently sourcing parts for the Electro-Vibe Mini and I'm confused about the headers. Looking at the specs for these, the combined male & female height of just the black plastic is around 11mm. From what I can tell, the 7371 bulb is nearly 16mm overall, with about half of that being the...

I guess it's been awhile since I've placed an order with Tayda. Today I noticed the low cost USPS shipping option was no longer available. I've always thought this was great if you didn't mind waiting about 10 days. I sent a message to them and this was their reply: Unfortunately because of...

I built a Twin Face earlier this year and put a bass cut control before the input as well. I got the idea from the OP, but found a decent article on it that helped me out. https://www.premierguitar.com/the-recording-guitarist-the-fabulous-focus-knob The article assumes the control is going on...

Good to know. Thanks for the tip!

I tried the Sunnyscopa film-free waterslide decals today on a powder coated pedal I got from Tayda. It was my first attempt at it and it came out pretty decent on the second try (I think I had too much glue and not enough heat the first time). Anyway, just wanted to chime in here to say there's...

Nice, clean build! I just built one a few weeks ago and at some point I should do a build report. I had the same issue with my status LEDs as you did; they did not line up with the holes on the template. I ended up putting some electrical tape on the LED leads and another strip where the wires...