Search results

Yes! Looks killer. I'm glad it's scratching a big doomy itch for you.

Looking for a little advice. I breadboarded this and like it quite a bit. So I drew the schematic out so someone could actually read it. I went ahead and fixed the pots so it was "correct". I also added power filtering and a PDR at Input. Couple of problems: The Filter switch makes a popping...

Next level clean. Noted for future builds.

I really struggle with the muff tone stack. I totally agree with you, too much treble. I usually change the values to give a flatter response. You can mess with it here to get a visual of the frequency response and try stuff. tonestack.yuriturov.com

Im not sure what would be a 1:1 equivalent but try what's on hand and see what sounds good. After all ehx famously used what was cheap and available and now we have all the variants we obsess over.

It sounded fine. Its a real hair splitting kinda thing. But if I a/b them it's different enough that prefer it the way it is. You could go all 2n5088,bc549,bc546,2n3904 off the top of my head and sound good.

5088 is a solid transistor for just about anything and most of us have plenty on hand. I wish I had a technical reason I could give for the bc549c but it really was what sounded best to me. I tried a ton of choices and things worked best when Q2/3 were different from the others. It brought some...

Thanks for catching that error. Its supposed to be 22K. I fixed it on the schematic so its clear.

No sockets on your chips. Bold!

BEHOLD! The OVERLOADER! Just a big muff that was tweaked and tweaked until it was great. Then I started experimenting with a way to blow it out more effectively than a boost in front. I put a Bass Boost in between clipping stages with a blend. Gain and Overload(Bass Blend) are very interactive...

The real talent of any hobbyist!

Hi all. As much as i love Electric Wizard i just don't play like them. Suffice to say the board has been sitting in a pile of never getting boxed things so i started to tinker. Here is the final product and it finally got boxed and everything...

Tasty

https://www.freestompboxes.org/viewtopic.php?f=7&t=34334&p=304185#p304185 https://dirtboxlayouts.blogspot.com/2025/08/sib-electronics-mr-echo-delay.html?m=1

Traced my original and modded for longer delays. The filtering on this one is pretty unique so the longer repeats dont get much chip noise. I put in soft switching for the surge switch too. For some reason the high gloss clear coat came out suuuuuper high gloss.

Im adding the Led into the existing circuit. It also swaps a resistor in the filters off pin 2.

My daughter is pushing for 'Heart Attack Rat'. Im thinking of drawing of a stressed out rat drinking from a coffee pot.

Thats sexy!

Mmm....we have a cricut. Guess i have to learn something new.

I am very proud of how this modded Rat (NO DUH) came out. Some value changes and a Filth control that blends between LED and Asymetric Si clipping. There is a lot of texture to play with here since the LEDs are never symmetrical unless all the way counter clockwise. I specifically wanted to...