Search results

I just totally redid the LED wiring and I put it into a bezel. Red wire to A for ANODE / POSITIVE and black wire to K for cathode / NEGATIVE. I can get LED to light up with I touch either side of the board with some small leads and a CR2032 batt (handy trick). When I power the unit, NO LED...

I'm gonna be pretty beefed if I put the LED in backwards. =( I will have to dismantle pretty thoroughly to get to it. I soldered it, shrunk wrapped it, glued it and its' under the board. I did use a coin cell battery from the back side just to TEST the LED and it glows nice and purple so I...

Here are two pics. I switched my DMM to read as DC VOLT. Reading on my DMM at the black and red lugs of the DC power innie jack is 9.25VOLT Power at the CATHODE side of D100 when touching ground of DC jack is 9.33VOLT

My DMM is "auto sensing" and can pick up whatever I measure. So for POWER, yes I am getting power into the jack itself and also getting power to the PCB in the - and + positions. The reading is 22.5. So yes, power IS coming in.

Mcknib what setting on DMM to use I use to check power coming into the + and - on the PCB?

No LED coming on. have in and out cable connected, DC power. no LED comes on. It's fully built sans the 4 op amps I need... Shucks. Get sound in bypass.

Super noob question. I just finished my second build but like a noob, forgot to order the OP AMPS on the original buy so I had to buy them after and they will come tomorrow. So my pedal is 99% done with slotted IC holders to put the op amps into once they land. Question. I went to test (with...

Hi there, peccary. Just wanting to confirm that the 1/8 watt version of this does indeed allow to bend the leads "tight" enough for PPCB boards? You said the 1/4W version was not tight enough but the eighth is good? My sanchez needed some super "tight to the body" bends and I had to make a...

Lots to digest here, guys. Thank you as always. The part sourcing is one thing. The building is another. And then the art is yet another and then putting the art on is yet another. It's all very great and challenging and I like it. I will continue reading up on how to do the art and...

Google is so full of this topic it is overwhelming and hard to know where to begin... Just like anything else that one has never done before. =)

Dude. This looks like some good stuff! Thank you, will read through this all!

my first build has and will have no markings on it. (see super generic image attached). For the next ones I do want to put graphics/text on. I have read the "no film waterslide" tutorial and am not sure if that is the way I want to go. I have a color inkjet and a black and white laser printer...

all parts sourced at TAYDA and ordered. went with two diff types of 56p 56pF 50V Ceramic Disc Capacitor and 56pF 50V Multilayer Monolithic Ceramic Capacitor

Thanks. I'm super new to this so I am not sure yet what common ones would be. Is it "normal" to use a Ceramic Disc or MLCC for a 56pF in this position? Tayda does have those just not in box film as you say. Glad I was not going crazy.

I'm going to try TAYDA to source from since I'm planning build #3 and not in any rush.. It will be Greengage OD, Plumes based. https://www.pedalpcb.com/product/greengage/ I'm building my cart at Tayda and am stuck on C3 and C7 which are 56p. I am trying to use all WIMA for the Box Film...

Her name is Charlee. She is not happy at all about having to wear this massive plastic cone to stop her from licking the wound. THANKS AGAIN FOR ALL THE HELP, LADS!

Good on ya, mate. Glad your boy is ok! Dogs are amazing buddies and u gotta do what has to be done. I have hens here for eggs and my dogs like to scratch at the coop and they are always effing up their paws. THANK U TO EVERYONE FOR THE HELP. AMAZING LEARNING EXPERIENCE!!!!!! Dirty...

On BOOTY, I was getting GROUND BEEP when touching GND to - of the C7 round cap. I got NO BEEP when touching BOOTY LUG 3 to + of C7. I ran a direct jumper from BOOTY LUG 3 to + of C7... and... IT WORKS!!!!!!! I HAVE BOOTY!! I HAVE SIZZLE AND BOOTY!!! HALLELUJAH LORD ABOVE ALMIGHTY J.C. WITH...

SIZZLE HAS BEEN FIXED!!!!! Direct wired LUG 1 GND of SIZZLE POT to the backside of board C24 film cap to the right side of that cap when looking at component view. Will work to fix BOOTY NOW!!!!

I am taking this in baby steps. It is slightly tricky because certain things can be "backwards" or "upside down" in relation to which side I am looking at so I'm being mindful of this. When looking at Page 1 of FM PCB layout and zeroing in on the SIZZLE A100K pot: Am I to interpret the...