Search results

I think we need to hear a demo!

I use a mac and Eas EDA is pretty easy.

Thanks for these links. I have so much trouble searching Mouser. I added some of those to my order. Fingers crossed they are good, they have similar fall times to the 5516 but slower rise time. I'm sure they will be fine. Might socket them and see.

Hey everyone I’m about to build the peddling tremolo but tayda is out of the recommended ldrs. Can I use one of the ldrs tayda does have which is the 5528 at the moment? I know they will work but I’m looking for maximum swoosh. Alternatively I am about to do a mouser order. Will one available...

If reducing gain is the goal then you can sever the connection between pin 1 and 8. A swithc is a good way to do this to allow you to switch on and off. Alos can use a pot.

Hey @Feral Feline I thought you might be interested in this. Finally assembled the vibrio thang after a year. I sat on this “thang” for so song because it was just so noisy out of the box that I was sure it would never go away. Anyway I was bored last weekend I decided to put it in an...

I need to make something in this colour NOW!

What device did you use to measure these transistors?

Nice. What pedal is that you are playing? Specifically the one on the right.

I use it successfully all the time. Did an order in December which they printed fine

You are right. I should have checked the schematic first and not assumed before replying

I’m sure it will be fine. If you think the range is too narrow with 1k you can connect a 510 ohm resistor between pin 1 and 3

If the emitter of q6 had good sound (left with flat side facing you) then the problem should be after that. There are only 3 parts between q6 and the output. These are R16, c1 and volume pot. Try probing these to see where the sound cuts out

If the bulb flashes but you get no sound then that is a clue where the problem is. Do you know how to make an audio probe? If so try to probe q5, q15 and q6. You should have sound on the collector of all of these (right side with flat face towards you).

It depends on the circuit you are using but I use a 1054 and 1044 as essentially interchangeable parts. There are some differences between them and I am sure there are circuits where they are not interchangeable, but I'm sure both will work in the sunflower. The main difference is that the...

I ended up using these jfets. Either I matched correctly or them being from the same batch were close enough. I now have a rad phaser.

Hey everyone I have been reading about the Escobedo Ugly Face. I really like some of the weird sounds that this thing can make, but i'm not really into the LMN386 fuzz circuit. Is it possible to add the Ugly Face envelope section to any other fuzz/distortion pedal of my choosing? Looking at...

Thanks. This makes me feel better. I tested about 15 2n5457s and they all measured pretty much the same. I assumed I was doing something wrong. Maybe not.

Did Did you match them or just use whatever?

Is the white here printed twice?