Search results

thanks for the input, as I said in another post I bought the full kit on Musikding, since I am in Italy it's not easy to get stuff from the US. I'll see if I can find some 3207 and 3102 without breaking the bank. This is only my 4th build :D

I wanted to reflow some solder joints but I realised my (very cheap) soldering iron is struggling a bit Ordered a new one, I'll do some work then. I really really like how this one sounds but the hiss is killing me...

Bump maybe you can't really tell from the video but the background noise is really high, especially considering my blend knob is only halfway and lag is barely at one third

here is the ticking when pedal is bypassed: here is the noise: Seems to me that the modulation isn't very "intense", can anyone that has built it confirm?

Also, only one of the wave form LEDs light up... Is it normal?

I've redone the input and output wiring and it seems it is a little better but when i let the chord ring, the noise becomes very noticeable... not sure what the problem can be, I'll record a demo tomorrow. Also, now the ticking in bypass has become worse, but it disappears once I put the pedal...

I'll try to move them and see if it's any better I've messed with the trimpot all afternoon yesterday, it's going from mute, to distorted sound, to chorus with loads of noise, no in-between:(

This bad boy, bought used 15 years ago after some years of crappy Zoom multieffects: Still on my pedalboard, so many good sounds out of it Second pedal was a... Bad Monkey :ROFLMAO: bought it for 30€, sold it one week ago for 150 😬

Haha sorry! Should have used "attempt" :D But send some more PCBs to Musikding, I'm desperately waiting to place a new order! No Chop Shop, no Mach 1 :( No they are quite snug, I just added a bit of solder for safety ah yeah, I trimmed that one, the photo was before I did it. I'll do a new demo

Hi all, I know this is a PCB from a (not even particularly liked) competitor, but I've been lurking this community for some time and I figured it's the right place to try asking. I wanted to order a couple of PPCB kits from Musikding but they were out of stock so I went for the PedalPCB...

Sorry for resurrecting a super old thread but I had the same problem and managed to desolder the potentiometer by putting a clipped resistor leg between the three pot legs, adding solder all over, wait for 30 seconds then apply heat and slowly pull and twist the pot, it will come off.