Search results

I use 225F for the drying stage. Just putting a number to it since the “lowest” setting is probably not consistent across ovens.

For the reverse polarity protection, I'm using IRFU5305PBF. The specific mosfet doesn't matter too much, as long as it's p-channel. I picked the IRFU5305 because it had very low RDSon (resistance between drain and source when the transistor is "on"): 65 milliohms, and at the time, was one of...

Thank you! IMO, reducing offboard wiring makes for a cleaner build. The polarity protection and electrical bypass are not proprietary; I credit RG Keen with their design. See Advanced Power Switching and Polarity Protection for Effects, and Bypassing and Switching with the CD4053 CMOS Analog...

Yeah, I’m sure it’s worthwhile to do some transistor rolling in this Major/Old Fashioned circuit, given how they make such a noticeable difference in the Diamond Peak. I too have a collection of low gain silicon transistors that I amassed during my Diamond Peak building spree. The DP sounded...

This is my second build of the AionFX Tachyon Amp Overdrive, based on the lead mode of the Boss SD-2. My first build was about two years ago. In a decluttering frenzy, I foolishly sold the first build, and later wished I still had it. I recently built the Angry Charles hoping to scratch the...

On the one I just built, the gain range is similar to the Diamond Peak. My Old Fashioned goes from not-quite-clean to mid/high-mid levels of dirt. It's definitely not subtle between min and max.

It's basically just more parts. It actually makes the build quicker/easier in my opinion, as having the bypass mechanism integrated into the actual effect PCB means less off-board wiring (which I always find tedious and overly time-consuming). Wire up the I/O jacks, power and the footswitch...

Here's my take on the @HamishR & @Chuck D. Bones collaboration, the Old Fashioned, which is a tweaked Animals/Skreddy Major Overdrive. It's a YASF (Yet Another Skreddy Fuzz), based on the same topology as the Lunar Module (PPCB Aldrin Fuzz), Screwdriver, Hybrid Fuzz Driver, etc. My...

Re: additional PSU filtering. Nothing really remarkable - I make a point to use a resistor (something in the 47-100R range) with a big cap. Builds like this typically use a 100uF, I go for at least 220uF. I used a 330uF here. I also have a series ferrite bead. None of this is really...

Here's my Churl of Toan. I've been try to declutter most of my infrequently used pedals, but I've held on to my Pauper (Prince of Tone). I recently started using it, and remembered why I didn't sell it. I never use the OD/distortion switch (it stays parked on OD), nor do I use the internal...

Are you saying you use this stuff as the glue/transfer agent for Sunnyscopa film-free waterslide decals?

What I do - and this is very similar to a process @MichaelW described somewhere - is to use this MG Chemicals 4140A Flux Remover for PC Boards. I cut a small bit of old t-shirt (say 4x4 inches or so). I get that wet with the Flux Remover liquid. I then daub the PCB with the wet cloth, let it...

Great-looking build, and great write-up! Thanks for posting!

So I'm now pretty certain this new GW1-PRO just isn't ideal for pre-finished (i.e. powder coated) pedal enclosures. I finally tried this process last night with my new printer. I deliberately did not pre-wipe the enclosure with acetone before starting the process. The result: I got...

This looks great! Ever since I built two Byzantiums, I've been a huge fan of this circuit. It's been a near-constant mainstay on my board. As I mentioned in that build report, I took a lot away from How To Get 6 Modulation Effects From a Basic Flanger Pedal Like The Boss BF-2 by Michael...

During covid, for the brief time I got to work from home, I bought a remanufactured Steelcase Leap v2 from Crandall Office Furniture. Back in 2020 it came in at just under $500, even with a couple upgrades. Looks like they've since gone up considerably in price, but should still be quite a bit...

That's what surprised me, I am indeed using the Bouni KiCad JLCPCB Tools. There is a setting for Don't fill zones, but I don't have that checked. Somehow I managed to skirt past the auto-fill. Oh well!

I've made that mistake before (submitted Gerbers with zones not filled properly), so ever since I refill zones like it's my job. But you're exactly right, I somehow managed to generate those Gerbers with non-refilled zones. I actually loaded up the same gerber zip file I sent to JLC directly...

So tonight I finished up a pedal based on a PCB of my own design. And when I powered it on... nothing! After some debugging, I found that one of the signal nets was shorted to ground. I narrowed it down to what I assumed were three possibly bad components. Fortunately, this part of the...

@MichaelW - did you happen to see this post from PaulC himself, where he says R9 (or maybe it's R10) should be 3k3 instead of 4k7? I built mine a while ago, not sure if the PCB silkscreen or BOM has been updated.