Search results

Dammit. I CANNOT believe I missed OakLahoma. /grabs dunce cap /sits in corner of shame

Probably: 123 Twiggy Lane Straightsburg, ?? 69420

SW is using a pole to connect K to ground. If you’re going to use the CLR and LED on the LMS board, you’ll need to connect A (above the I/G/S/O to V+ on the LMS board. That will bring V+ to the 3PdT board and then should let you use the CLR/LED on the LMs board. There won’t be a connection...

Man, that is impressive a switch can roll from a 25W tube to a 40W tube. /scribbles notes furiously

@vigilante398 Peacemaker? Or a different model? That front plate looks different than what I can recall off the top of my head.

Think of it this way (and I struggle with this): you learned what didn’t work, what happens when you break something, and you learned how to narrow down where there was a problem. I’d call that a pretty darn good first shot at building a pedal, specifically something that complex.

What I would do now is look at the voltages on the working side that connects to the LFO and then compare them to the non working side. My guess is things lit up because you might have bumped something, and I’ve done that by accidentally shorting something I shouldn’t have or bumping voltage...

I just don't think jessenator appreciated my bland and mild opinion. #TeamNeutral.

Maybe just hook a piece of wire with two bare ends (shaped like a J) to temporarlily connect them together.

GAWRSH

Huh. Very strange. Good luck figuring it out. Or maybe your need a seance to remove the gremlins from your router.

Press and hold and the other reactions pop up. Mobile friends, untie!

So, where I circled is where 37B is supposed to connect to ground. If it connects to ground, awesome. It was a thought that maybe it wasn’t fully soldered in and was floating. Experiment: can you hook or alligator clip wire directly from the two ends of the resistor to the potentiometer lugs...

953 Begrudgingly edited: team muff slightly more overrated. I still stand that both are equally overrated and beloved at the same time.

That seems logical. I'd try to reflow the solder and check again. Check to see if the 560ohm goes to ground. If it's still bad, maybe there's a bad trace. OR perhaps the depth pot went bad. At least you've narrowed it down to one spot.

If you just have the pieces lying around, it's TECHNICALLY not a another guitar.

Turbo Trem is the one last one I need to complete the set. Reminds me I need to get those boxes built.

For when you need them uber-sub-lows.

Nothing much. Probably lets a few more bass frequencies through that otherwise would be blocked by the 3.3uF

Looks like a CE-2 + TAPLFO chip + screen. What a bunch of over fluffed marketing-speak.