Search results

Swapped an new switch in there and it's working great!

Ok so I put on "10 hours of relaxing sleep music" on Youtube and traced the circuit with the audio probe, I noted where the sound was noticeably different -On IC1-7 I I first get a terrible nasty screechy noise (hereafter referred to asTNSN) -R10 TNSN on the North-most leg (I don't know which...

Thanks, I don't think they were touching, but very close. I just put some electrical tape between them to make sure they won't touch

Got the stuff that I needed to make my audio probe, now I just have to learn how to use it!

D101 and D102 seem to be facing the right direction, the stripe (though slightly worn off) matches up with the one on the pcb Electrolytics are all 50v

Not yet! Going to build one though with parts that I've got coming this weekend

On R15 on the pin closer to the footswitch (pin 2?) I get -6.8v, on the other side I get-620mv IC2 pin 4 I get -6.8v, IC2 pin 8 I get 14.1v

I'm getting 14.1v there

Yep those too

I've gone over all the resistor and cap values twice now and all the values appear to be correct. I haven't found any visibly bad solder joints or accidental connections etc. I just went in and reflowed the solder joints that aren't easily visible from the top of the board (electolytic and box...

I'm not dead yet!! :ROFLMAO:

While I was fooling around with everything one of the DC lugs snapped off. So I guess further explorations will have to wait until I get a new one in the mail! I'm getting an outie this time so it will have room. The lug was already weak because I had to bend it to make it fit, so I had ordered...

Gave it the bypassaroo, no change unfortunately

Would that be the left or right pin with the flat side of the transistor facing forward? I'm getting -0.62V on the left pin and 13.8V on the right pin

My dad had two cats for the longest time, both of them passed away last year not too far apart. Several months later I finally convinced him to adopt a new kitty. He picked out a very quiet/timid Siamese and named him Preston, but once he got he got used to his new environment Preston opened up...

Good thought, but no it's a bc549c from Tayda

Yeah that's how I had it originally, I might go back to it

I'll definitely check it out! I had a damaged switch (probably overheated) on one of my other recent builds

Lol, got positive 13.5V this time. It was probably positive before, my multimeter screen has a DC symbol right by where the "-" lights up and it trips me up sometimes

-14.2V on IC2-8