Search results

I have no experience with this at all, only transfers for etching, with mixed results. But laser printer powder("ink") melts around 230-250F, depending on manufacturer and color. I am guessing you need to hit that temp to get it to release from the transfer paper, adhering only to the glue. Just...

If you have a camera mount or phone mount(or just frame it with your phone where the edges of the PCB are just in frame), snap a photo of both sides of the board, invert one 180 and superimpose the images setting the opacity to 50ish percent. That's helped me a few times when tracing for...

Go full stupid with a freeway switch

It looks like the plastic housing is groved to go other either way. And those are stereo jacks, yeah?

You can passivley split line level 2-3 times without issue as long as you don't have stupid long cable runs and are using equipment made after ~1970. This is done in every pro studio all the time. Every patch bay has "mults" as in multiples. It's just jacks normaled together to split signals...

I would reach out to CalSonics/California sonics on yt. He has been putting out good content and recently wrapped(I think) a really good series on the fuzz face. Perhaps he would do a write up or a multipart segment to tie in?

Bonnaroo is the weekend before about an hour away from the Caverns. If you're into that

At least the cork won't break down for 3-4 years ..

That would be a hell of a road trip from KC. It's a cool venue and you can camp there. Though Tennessee in late June is... Hot and damp. If you decide to camp, just purchase your spot when you get there or call the venue. Buddy booked a spot online for like 150 and it was $25 or so onsite.

Thanks. I did leave a several hour gap between the two. 😉 Can only imagine what a black market liver costs in today's economy.

Proper trap should get him. My current headache is a neck ache. Particularly, a slipped disc C3/C4. Neck, left arm, rotator cuff, left shoulder blade, all inflamed. It's pretty terrible. Best part is I am on day 3 of 8 days in Orlando with the family. Woke up with it hurting at 3am the morning...

Maybe try 2x in series?

Not sure but this and the Aion Luna are based off the Tremulus Lune Aion says this in the Luna build doc

Good haul. Glad the chocolate finally unloaded. Either to be used as a serious controller or hacked for a DIY CNC control/estop.

Gonna want to ditch the ground to the xlr and use an insulated jack. Otherwise your ground lift isn't a ground lift. The xlr shield should be getting it's ground from the next device inline anyway. If you're going full bells and whistles, an oscillator test signal wouldn't be a bad thing to...

Have not but in observing other dfx builds, I would advise not drilling power or audio jacks until you have the PCB seated on the pots and can measure. I've seen several builds that pre-drilking resulted in interference with the pcb

It's clearly a replacement for your noisy behringer

At Disney with the kids but if the hive doesn't crack it by tonight, I'll give it a closer gander. My guess is someone will name the clone by then

Wait. 4049 is 16 pin. I'm betting pin 1 is hot on the 14dip